Many friends bought a new car and brought it home, only to go home and find a lot of car problems, angry to find the 4S store theory, 4S shop will always prevaricate consumers for various reasons, so that the user who bought the car is really miserable.
Then as a car white or a friend who buys a new car for the first time, how to test whether a car is qualified when picking up the car is particularly important.
Today, I will tell you about the five-step method of car inspection, and I hope you will collect it.
First, check the documents. Each car has a certificate of conformity from the factory, so when picking up the car, we must look at the vehicle's certificate of conformity, in addition, the vehicle's instructions and manuals should also be checked, because the use of each of our vehicles and the description of the later maintenance are in the vehicle manual and the manual of use have very detailed instructions. After the new car drives home, open the instruction manual, one by one familiar with the configuration and function of the car, familiar with the function of the vehicle, can make us look a lot more at ease in the future driving process. Vehicle maintenance cycle maintenance manual has instructions, the maintenance cycle of each vehicle is different, the maintenance cycle of fuel vehicles and new energy vehicles is also different, regularly in accordance with the time or mileage specified in the instruction manual maintenance vehicle, can make our vehicles remain active for a long time, but also increase the safety of our driving.
Second, check the vehicle's nameplate. The vehicle nameplate is generally in the position of the B pillar next to the passenger seat of the car, and when we check, we can open the car door to see the nameplate on the B pillar. The nameplate indicates the production date of the vehicle, we buy a new car, the general production date and our pick-up date within 3 months of the car are normal, in addition, check whether the vehicle's code, color, displacement and other nameplate information is consistent with the certificate of conformity. It is also necessary to check whether the production date of each glass and tire of the car is the production date before the production date of the vehicle, because before the new car is built, our glass tires and other parts are earlier than the production date of the whole vehicle, if there is a problem with the production date of the glass and tire, then the car is suspected of replacing the glass and tire later.
Third, check the appearance. The appearance is actually the most prone to problems in the new car, because the vehicle in the transportation process, due to the long distance, the vehicle unloading, the process of transfer, it is easy to occur the damage to the car, then there will be some damage to the car, although the damage to the car is generally some small injuries, but we buy a new car is a new picture, flawed vehicles for every consumer is unacceptable. However, if you do not check carefully, when you drive the car out of the 4S shop, the 4S shop will not recognize the account, and it is reasonable and unclear at this time. Appearance, mainly check whether the paint color is glossy or color difference, there is a color difference to indicate that the car has the suspicion of paint repair, but also to check whether there are scratches on the surface of the paint. In addition, it is also necessary to check the wear degree of the vehicle tires, if the tires have a certain degree of wear, then the car may have been used as a test drive by the 4S shop before, and the 4S shop should be replaced by a new car and re-tested.
Fourth, check the vehicle's headlights, function buttons and display mileage. After the car starts, we first look at the number of odometers of the vehicle, normal vehicles, from production to manufacturer inspection to consumer hands, the mileage is generally within 20 kilometers is relatively normal, if more than 20 kilometers, the car may be used by 4S stores as exhibition cars or test drives before. Secondly, press the various function buttons inside the vehicle in turn to see if the function is normal, especially to hit the air conditioner of the vehicle to the cold air gear, to see if the air conditioning compressor is running normally, when checking the vehicle lights, you can let one person control the lamp button in the car, and another person to see whether the lights are normal. Here is a reminder that when inspecting these functions of the vehicle, be sure to hold the configuration list of the vehicle to see whether the function of the vehicle is the same as the configuration list, so as not to mention the low-end and high-selling models.
Fifth, check the engine and chassis. At this time, we have to open the hood of the vehicle, listen to whether the sound of the car engine is abnormal, whether the engine shake is relatively large, at this time the general novice can not check out, then, we can take an old driver to help us check it when picking up the car. The inspection of the chassis requires us to drive the car to the maintenance workshop of the 4S shop, lift the car up, mainly to see whether the engine and gearbox have oil leakage, because the car is after all a product of mechanical parts assembled, and it is inevitable that the inspection will not be strict when manufacturing, and there will be some small probability of defective products. So we must check carefully.
If the above five steps are checked, then we can safely pay the money at this time and drive the new car home. If there is a serious problem in the process of inspection, then the most direct solution is to let the 4S point change your car.
Finally, I would like to emphasize that when you pick up the car for inspection, don't feel troublesome, and no matter how careful you are! After all, it's something we've worked so hard to earn, right?
This is the end of the video in this issue, I hope it will be helpful to everyone.