Click below to subscribe to the Beginner's Cheats Season 4 column to watch 50 episodes including this one
Let's take a look at the parking space of this car, which is currently parked with the front of the car facing inside, and it is parked very neatly, and we usually encounter two scenarios:
One is that the parking position is a parking space, and his left side is the vehicle continues to the left is a wall, can not drive the vehicle past to use the method of inverting the library, and the right side of the right column is also a wall, reverse the position of the car may need to find a place to turn around in advance, in most cases need to drive directly into the front of the car.
Another situation is that the location of this parking space is a relatively narrow aisle, the vehicle in this position to drive past, equivalent to taking a reverse Z-shaped turn, first turn left is a narrow road, and then turn right is the position of this parking space is narrower, because there is a pillar on the left and right, after turning past, there is also a car parked on the left side, the difficulty of this turn is relatively large, you need to prevent the left body from scratching the left column, and the right body scrapes the right column to prevent the head from scratching the left side of the vehicle.
Let's look at this position from the front, the width of the parking space opposite is 2.4 meters, because of the pillar on the left side of the parking space, it is a little narrower than the actual width of the normal parking space, the width of the aisle is about 4 meters, just enough to accommodate two cars barely able to drive, assuming that there is a wall on the left, the right side of the column is also a horizontal wall, and the vehicle turns from the right hand side for a while and then turns over.
This is an excellent position to practice extreme reverse turning, through this exercise can let novice friends master the skills of accurately completing the extreme reverse right angle turn while taking into account the left and right body and the front of the car in extreme situations.
Well, now that you have a detailed understanding of this position, the following is through my real-life demonstration to see how to grasp the timing and point of view in a similar environment to grasp the direction of the turn.
When the vehicle passes through the aisle and turns left, it is slightly closer to the left column and slightly away from the right column, that is, it can neither be too close to the left side but also keep a large distance from the right column. This is because turning too close to the left is easy to scratch the left body and cannot complete the left turn; the angle is too small when turning to the right close. The purpose of the first turn is to complete the left turn of the front of the car and to create a larger turning radius for the right as much as possible.
Hang up the front gear to start by hitting the direction to the left, let the front of the car gradually approach the left column, through the lower left corner of the front windshield to see the alignment column, go back to the right direction,
When aligning the edge under the front windshield to the corner of the front pillar, make a circle to the left, causing the front of the car to turn left.
From the back of the car, you can see the change of the route of the vehicle turning left, first hitting the left direction,
And then go back in the right direction,
Then hit the left again.
At this time, looking at the left rearview mirror, you can see that the left body and the left column only have a few centimeters of space,
Turn back to the right direction to the left, the purpose is to make the left body and the column pull away properly,
Hit the full direction to the right again,
Visually, when the lower edge of the front windshield of the front windshield is aligned with the headlights of the front car, continue to turn right with confidence in the right direction, and there will be no scratching.
The vehicle continues to turn inward to see that the distance between the right body and the right column is still relatively loose, which is the space reserved for the right turn carry.
The downward edge of the visual front windshield can be aligned to the vertical height below the front door handle and draw an arc all the way to the right without reaching the body.
Looking back at the right car window, you can see the lower position of the right side of the bottom view angle on the lower edge of the right car window, indicating that the right side of the car body is still far from the column.
In the back of the car, you can see the vehicle turning to the right of the process of the body gradually approaching the right column.
The right column begins to appear in the right rearview mirror, continues to keep the direction of the right turn state forward, as the body and the column approach, the body gradually straightens,
When the right side of the body is parallel to the cylinder, stop back in the positive direction,
From the back view, you can see the process of vehicle straight, car straight, wheel straight, parking,
Directly behind, you can also see that the vehicle is parked very directly and on the side of the right column, which is convenient for the left driver to get off. If it's an aisle, just go back in the right direction and move on.
The distance judgment techniques used in the above storage method should be measured according to the actual model used by everyone, the height of the driver, and the height of the seat.
Dear old and new friends, a total of 50 videos of "Beginner Cheats - Season 4" have been updated