The second conference of the Redmi K50 series released a number of products, including notebooks, TVs, mobile phones and other products, but the hottest is the K series of mobile phones, in this conference a total of 3 mobile phones were released, namely Redmi K40S, Redmi K50, Redmi K50 Pro, although the three mobile phones are very good, but the highest voice and popularity is still equipped with the K50 Pro version of Tianji 9000. Not only is this phone powerful and reasonably priced, but the drawbacks are also obvious!
In terms of appearance, Redmi K50 Pro, as previously revealed, adopts a stepped camera module design, which separates the camera area from the flash area through different heights of bulging to achieve the effect of highlighting the subject. This time, the Redmi K50 Pro rear uses a glass material, the feel is very good, but unfortunately, the middle frame of the machine is still made of plastic material, no doubt this configuration is slightly cheaper. Even so, the weight of this phone is still not suppressed, the machine weighs 201g, the thickness is 8.48mm, if the metal frame is used, the weight of the machine will soar again!
In terms of screen, Redmi K50 Pro uses a 6.67-inch top-of-the-line straight screen, which comes from Samsung and uses OLED materials, so it is excellent in color display and screen brightness. At the same time, the resolution of this screen is also as high as 2K, the refresh rate has reached 120Hz, and this phone also adapts to the high frame rate mode of all mainstream games on the market, so it will be more smooth when playing the game, unfortunately, this screen only has 60Hz and 120Hz two refresh rates to choose from, and the follow-up Redmi official may be optimized for adaptation. In addition, this phone still does not support fingerprint recognition, which is the biggest flaw on the screen.
In the past, the images of the K series have not been too bright, but the Redmi K50 Pro is completely different. The machine uses a 100 million pixel main camera, which is better in the image resolution, and the lens is equipped with OIS optical image stabilization, which can achieve stronger image stabilization function through a small amount of reverse direction displacement, which is also a high-end technology decentralization! To know that in the past, Xiaomi only had AUS in its flagship machine, and the K50 Pro was the first time to carry it. In addition, the camera's secondary camera is two "old friends", respectively, 8MP ultra-wide angle lens and 2MP macro lens, the secondary camera configuration is relatively mediocre, and the selling point is not very large.
The ultimate performance is the endorsement of the Redmi K series, K50 Pro is equipped with a Tianji 9000 processor, which uses TSMC's 4nm process, and the overall energy efficiency ratio is greatly improved. In addition, in order to squeeze the performance of Tianji 9000 to the extreme, Redmi K50 Pro not only added LNDDR5 and UFS3.1, but also increased the VC liquid cooling area, with 7 layers of graphite stereoscopic temperature, Redmi K50 Pro is more outstanding in heat dissipation, so the operation will be more stable!
In the past, mobile phones, either sacrificing battery life to improve charging, or sacrificing charging to improve battery life, has not had a more perfect program, so many people complain: fish and bear paws can not be both. This time Redmi K50 Pro gave a solution of the best of both worlds, the machine is equipped with a 5000 mAh battery, at the same time, thanks to the surging P1 charging chip, the phone also achieved a single cell 120W fast charge, soon can be fully charged.
Redmi K50 Pro in terms of hardware can be described as full of full line, but the shortcomings of this phone are also obvious, do not support screen fingerprint unlocking, no LTOP, rear secondary camera some make up a number, more or less let consumers some disappointment. However, looking back at the starting price of 2999 yuan for this phone, the cost performance is also very sweet!