laitimes

The Heavenly Sword needs to be forged at high temperatures, how does Huang Rong hide the secret book in it? Jin Yong gave the answer in his later years

The Yitian Sword and the Dragon Slaying Sword are the two most important "props" in the Book of the Dragon Slayer in the Heavenly Heavens, shouldering the special mission of revitalizing the Central Plains Martial Forest.

The Heavenly Dragon Slayer, which has both toughness and hardness, can restrain the blades of any opponent, and the Nine Yin True Scriptures and Wu Mu Testament hidden in them are the real "great treasures"!

According to the original work, the Nine Yin True Scriptures were hidden in the Yitian Sword, and the Wumu Testament was hidden in the Dragon Slaying Sword, but these two sharp blades needed to be forged at high temperatures, how did Huang Rong hide the secret books and martial arts in them?

The Heavenly Sword needs to be forged at high temperatures, how does Huang Rong hide the secret book in it? Jin Yong gave the answer in his later years

Rely on the Heavenly Sword and the Dragon Slayer Sword

In the original work, the casting process of the Yitian Dragon Slayer is very vague, and the depiction of how the Yitian Sword and the Dragon Slaying Sword are sharp and inexorable is much more specific.

During the battle between the Extermination Master Tai and the Golden Flower Mother-in-Law, the Heavenly Sword was not yet sheathed, so he cut off the opponent's "Coral Gold" crutch, so that the arrogant Golden Flower Mother-in-law suffered a big loss——

The exterminator was carrying the hilt of his sword, and without removing the sheath of the sword, he even sheathed the sword, and then pointed at the chest of the Golden Flower Mother-in-law. Golden Flower Mother-in-law crutches a letter. The exterminator's wrist trembled slightly, and the sword scabbard had hit the crutch. However, the soft sound of the "snort" obtained was like tearing thick paper, and the overseas artifact of the Golden Flower Mother-in-Law and the "Coral Gold" crutch, the most precious treasure in the soldiers, had broken itself into two pieces...

The Heavenly Sword needs to be forged at high temperatures, how does Huang Rong hide the secret book in it? Jin Yong gave the answer in his later years

Exterminator too

When the six major factions besieged the Top of The Light, the Extinction Master Tai relied on the Heavenly Sword in his hand to defeat Zhuang Zheng, and killed the Rui Golden Banner Sect, and none of them could resist the Heavenly Sword!

The Exterminator Tai hated the Demon Sect so much that he swung his sword and killed him. Leaning on the heavenly sword blade everywhere, the sword was broken, the limbs and heads flew... However, the Extinction Division's Great Heavenly Sword was too sharp, and her sword moves were extremely fierce, and the green frost was everywhere, invincible...

Cutting off the golden flower mother-in-law's crutch proves the "hardness" of the Heavenly Sword, and the siege of the Bright Top shows the "toughness" of the Heavenly Sword, from the perspective of the real cast sword, the sharpness and hardness of the blade are difficult to coexist.

The sharpness of the weapon depends on the angle of the blade, the angle of the blade is small, in order to cut the hair like mud, but in actual combat, it is easy to cause the blade to collapse, the blade is sharp, the angle of the blade is large, the hardness will be high, but it will reduce the sharpness to a certain extent.

The Heavenly Sword needs to be forged at high temperatures, how does Huang Rong hide the secret book in it? Jin Yong gave the answer in his later years

Gentetsu Heavy Sword

The main raw material for casting the Yitian Slayer Dragon comes from yang Guo's Xuan iron heavy sword, which Huang Rong melted and added Western fine iron to forge.

Although I don't know what kind of skilled craftsmen Huang Rong invited, and what methods were used to forge the heavens and slay the dragon, the sharp blade after molding has a strong high temperature resistance property.

Yu Daiyan of the Wudang Sect, when he found the dragon slaying knife, it coincided with the "Three Birds of Changbai Mountain" supporting the furnace and pulling open the bellows to melt the dragon slaying knife, and the black and dull sword remained in its original appearance in a high temperature state.

The Heavenly Sword needs to be forged at high temperatures, how does Huang Rong hide the secret book in it? Jin Yong gave the answer in his later years

Yu Daiyan

Yu Daiyan turned a wall and stepped into the main hall, suddenly the light was dazzling, a hot gas rushed in, only to see a large furnace made of rock in the center of the hall, the flames rose, three people stood next to the furnace, pulled three large bellows, and threw fire into the furnace. In the furnace was a single knife four feet long and dark... But when I saw that the flames turned from red to blue, from green to white, the single knife was always black and dull, and there was not even a hint of dark red...

The melting point of metal products is very high, and whether the secret books, martial arts are paper or silk products, the melting point is far lower than that of metal, which has caused a loophole in "The Book of the Dragon Slayer in the Heavens" that is difficult to justify!

First of all, let's take a little science about the melting point of iron products: the melting point of iron is 1536 degrees, the melting point of metal luster is 1538 degrees, the boiling point is 2750 degrees, it can be dissolved in strong acid and medium strong acid, and it is insoluble in water...

The Heavenly Sword needs to be forged at high temperatures, how does Huang Rong hide the secret book in it? Jin Yong gave the answer in his later years

The Nine Yin True Scriptures Burn Point

Let's take a look at the melting point of paper products and silk products: paper, neither crystalline nor metal, there is no melting point, the flash point is 130 degrees, the flash point of silk products is lower, theoretical analysis, no matter what method is used, secret books and martial arts cannot be kept safely within the tip of the knife!

Mr. Jin Yong's Yitian Dragon Slaughter Record is divided into 3 versions, published in the form of serials in Ming Pao, called serial editions, revised editions after mid-term optimization and revision, and century new revisions.

Chapter 27 of the Revised Edition of the Book of the Dragon Slayer of Yi Tian - In the hundred-foot-high tower Ren Huixiang, the exterminator Tai explained in detail to Zhou Zhiruo the secrets of the Book of Yi Tian and the Book of Slaying the Dragon——

The Heavenly Sword needs to be forged at high temperatures, how does Huang Rong hide the secret book in it? Jin Yong gave the answer in his later years

Huang Rong

Before casting the sword and casting the sword, Huang Nuxia and Guo Daxia exhausted their efforts for a month, and wrote down the essence of the art of war and martial arts, which were hidden in the sword... After you get the dragon slaying knife and the heavenly sword, find a secret place, hold the sword in one hand, hold the sword in the other, transport the internal force, and slash each other with the sword, and the sword and sword will be broken at the same time, and you can take out the secret note hidden in the body and blade of the sword. This was the only way to take out the secret, and the sword was destroyed from then on

It is clear that the revised version did not give a reasonable explanation for the loopholes that appeared, until 42 years later, Jin Yong perfectly solved this problem in his later years.

The first edition of the Yitian Dragon Slayer was written around 1961, and in 1977 it was deeply optimized, that is, it was a triptych version, and the 2003 century new revision made a more reasonable explanation of how Huang Rong hid the secret books and martial arts in the Yitian Sword and the Dragon Slayer.

The Heavenly Sword needs to be forged at high temperatures, how does Huang Rong hide the secret book in it? Jin Yong gave the answer in his later years

Jin yong 's

After you get the Dragon Slayer Sword and the Heavenly Sword, find a secret place, first cut each other with swords, then saw each other with serrated teeth, and the sword and sword opening can take out the iron piece hidden in it. This is the only way to take out the map. Do you remember? Even if someone gets this sword at the same time, who would dare to risk cutting each other with swords and swords and destroying these two blades at the same time for no reason?

Relying on the Heavenly Sword and the Dragon Slayer Sword to cut each other, taking out the iron pieces buried in it, and then finding the map where the secret book was buried, so painstakingly modified, it was both reasonable and unexpected.

The Heavenly Sword needs to be forged at high temperatures, how does Huang Rong hide the secret book in it? Jin Yong gave the answer in his later years

Zhou Zhiruo

Zhou Zhiruo performed a "divine operation" on the Spirit Snake Island, successfully married Zhao Min, found the map buried in the Nine Yin True Scriptures and the Wu Mu Testament, trained into the Nine Yin White Bone Claw (quick version), shined at the Shaolin Temple's "Lion Slaughter Conference", and partially completed the last wish of the extermination master...

A good work, can stand the test of time, even if there are some "loopholes" can be further improved in the later stage, about the Heavenly Sword needs to be forged at high temperature, how Huang Rong hid the secret book in it, Jin Yong gave the reader a perfect answer after 42 years!

Read on