IT Home News on February 24, Xiaomi Redmi 10A has previously obtained the TENAA database certification of the Ministry of Industry and Information Technology, and the model number is 220233L2C.
The machine's network access ID photo has also been announced this afternoon, equipped with MediaTek Helio G25 chip, front 6.53-inch IPS LCD waterdrop screen, rear fingerprint recognition.
As can be seen from the figure, the camera module and fingerprint recognition of the machine are placed in a large rounded rectangle, and the Redmi logo is printed on the right side, which is still somewhat different in design.
IT Home learned that the Ministry of Industry and Information Technology website shows that the phone will have an SD card slot, support fingerprint scanning, and the mobile phone body size is 164.9mm× 77mm×9.0mm. It features a 6.53-inch IPS LCD screen with a resolution of 1600×720p and support for a 5-megapixel selfie camera. The phone has a 13MP main camera on the rear. The Redmi 10A will be powered by MediaTek's Helio G25 chip, and the list confirms that the phone will be available in no less than four sizes, including 2GB+32GB, 3GB+32GB, 3GB+64GB and 4GB+128GB options. The battery capacity is 4900mAh, and the software is pre-installed with the Android 11-based MIUI 12.5 system.