Microcomputer relay protection tester CE certification how to do

　　Microcomputer relay protection tester is a new type of intelligent test instrument, which plays an important role in the safe operation of power system. Crisis relay protection tester want to export to the European Union needs to apply for CE certification first, this article will introduce the microcomputer relay protection tester CE certification application process.

　　Products in the CE certification directory want to enter the EU market must go through CE certification, crisis relays in the CE directory, export to the EU is the need to go through CE certification first. Microcomputer relay protection tester CE certification generally needs to meet the LVD low voltage directive and EMC emc compatibility directive.

　　Microcomputer relay protection tester CE certification reference standard:

　　EN 61010-1-2010 Safety requirements for electrical equipment for measurement, control and laboratory Purpose Part 1: General requirements

　　EN 61326-1-2013 Electrical equipment for measurement, control and laboratory use. Electromagnetic Compatibility Requirements Part 1: General Requirements

　　Microcomputer relay protection tester CE certification need to submit the following information:

　　1. Company information: name, address, trademark, business license;

　　2. Product information: name, model, technical parameter table (if there are multiple models, the difference between series of products is required to compare information);

　　3. Instruction manual;

　　4. Samples, etc.

　　Application process for CE certification of microcomputer relay protection tester:

　　1. Project application - submit testing application to the testing agency supervision.

　　2, data preparation - according to the testing requirements, the enterprise prepares the relevant documents.

　　3, product testing - the enterprise will be tested samples sent to the laboratory for testing.

　　4. Preparation of report - certified engineers write reports based on qualified testing data.

　　5. Submit for review - the engineer will review the complete report.

　　6. Issuance of certificate - after the audit is correct, the certificate will be issued.