Many users have a limited budget allocated to the chassis when installing the machine, but they want a product with high appearance, solid materials and strong expansion ability. If you also have such a requirement, then you may wish to consider the Hangjia GX580H water-cooled version of the chassis, which is an easy-to-use and inexpensive chassis product
Click on the video to learn about the Hangjia GX580H chassis
The Hangjia GX580H water-cooled version is available in black and white, and the one-piece front panel follows the design of the previous generation: the irregular polygon shape with a large number of bevels is still the kind of impressive simple, hard-hitting style. With a body of 380mm× 210mm×485mm, it is a very standard 7-slot medium tower chassis in terms of size.
The one-piece front panel is fairly simple, while the flat surface makes it easy for players to customize stickers or mod, giving the chassis a more personalized look.
There are large areas of heat dissipation holes on the upper and lower left and right sides of the front panel, which can have sufficient cold air entering the inside of the chassis to take away the accumulated heat, create a front air inlet air duct, and improve the heat dissipation efficiency.
Hangjia GX580H water-cooled version has been upgraded to a very popular hinge magnetic design, the side panel is more convenient to open and close, but also avoids punching holes in tempered glass, increasing the risk of self-explosion. Removing this hinge magnetic tempered glass side panel is also simple: pull it open to 130° to 150°, and lift it up with the bottom. This design greatly simplifies the operation of the user to disassemble and install the side panel, and the installation and maintenance are easier.
All keys and connectors are set at the top.
The inside of the chassis is neatly worked and the hardware compatibility is quite good. The length of the graphics card is 320mm, which is enough space to accommodate most of the current graphics card needs, and the 160mm height limit is also comfortable with the high-end air-cooled CPU heatsink. In the independent power supply compartment, you can also obtain more power installation space by moving the installation position of the hard disk shelf, and you can load a high-end power supply with a length of less than 170mm.
The Hangjia GX580H water-cooled version is specially optimized on the top of the chassis. Although the previous generation also noticed the compatibility problems of 240mm water cooling and vest memory, it can only support memory installation with a height of less than 32mm. Hangjia GX580H water-cooled version completely solves this problem, when installing the 240mm water-cooled drain, all vest memory can be installed, and the compatibility is greatly improved.
For mainstream players, if you want a good and inexpensive chassis product, the Hangjia GX580H water-cooled version is a cost-effective choice.