laitimes

Learn a little engineering expertise every day - Design Part 3

author:The king is low-key
Learn a little engineering expertise every day - Design Part 3

1. Living water tank design

In the design of the project living water tank, it is usually designed to meet the water supply needs of the project, but not from the later property to the water tank cleaning considerations, according to the relevant regulations the water tank to be cleaned twice a year, if the water tank is not divided inside, then the domestic water supply will be interrupted when cleaning the water tank, affecting the use of the owner. Therefore, it is recommended to divide the interior of the living water tank into two water tanks, use water pipes to connect and set valves on the outside of the two water tanks to ensure that closing either water tank does not affect the normal water supply and avoid affecting the normal use of the owner.

Learn a little engineering expertise every day - Design Part 3

2. The setting of the water tank ladder

In the design of the living water tank, usually only consider the convenience of the setting, and will not consider from the perspective of use, such as the living water tank is not set up on the ladder, which brings inconvenience to the later cleaning work. Secondly, the tank inlet valve is set near the water tank cover plate to facilitate the replacement of float valves and other facilities. And the water level meter is configured on the water tank, which is conducive to the property personnel to understand the water storage status of the water tank in real time.

Learn a little engineering expertise every day - Design Part 3

Welcome everyone to correct the exchange and learn and progress together.

Read on