With the winter vacation coming, it is time for young drivers to come to learn to drive, but many novice students are folded on subject two, but subject two has a discolored project, that is, reversing into the warehouse, some students even if they successfully get a driver's license, in the usual reversing time will still be bad, very headache, so that people lose confidence in driving, I deliberately asked some old drivers, here to share some experience with you.
The first point: the principle of reversing
Most of the steering wheels of the car are front wheels, the rear wheels can not be rotated, so the trajectory radius of the rear wheels is smaller than the trajectory radius of the front wheels, which also causes the action of the front wheels to be larger than the rear wheels, and this principle can be used to reverse when reversing. Most people think that it is simpler to enter the warehouse in a forward way, but in fact, if you understand the trajectory of the car, you can find that it is much simpler to reverse the car than to enter the library before.
When you enter a small space in a thousand pounds, it is difficult to control the steering of the body because the rear wheel cannot be rotated, but when reversing, it is different, we can use one of the rear wheels as the central point to adjust the direction, really can only meander through multiple obstacles, of course, how to enter the warehouse is also determined according to the environment at that time.
Second point: Reversing essentials
After we know the trajectory of the wheel, we can study the essentials, when reversing, we can choose usually a corner of the garage door as a positioning point, and then the corresponding car's rear wheel wheel close to it, but the outside must leave enough space, at this time start to turn the steering wheel, you can start reversing.
When reversing, you must not care about the head and tail, the tail does not care about the head, which is also the specific reason why the right front of the car is often hit, and the angle should also be paid attention to, and it must be adjusted to determine the angle to determine the positioning point and the rear wheel will not hit the time and then reverse, there is also a point that must pay attention to the obstacles behind the car, when reversing, due to poor line of sight, it will often hit things, so it is necessary to pay more attention to the rear obstacles.
summary:
After understanding this knowledge, most of the reversing situation can be handled, of course, there will still be some precautions. Although the car is falling backwards, but the eyes can not always stare at the back, that is, Gu Tail does not care about the head, you novice students must pay attention to these points.
If the place is narrow, there are cars or other obstacles on both sides, and then when reversing to the left, as far as possible to make the body attached to the left, and vice versa, the purpose of this is to turn in advance, thereby shortening the reversing distance. Another point we need to pay attention to is to avoid playing wheels in situ, which will not only damage the car but also be heavier.
Of course, novices can also develop a habit of returning a wheel in the opposite direction before the action is completed, so as to save a lot of time for U-turns, so that when we move the car again, it saves time and effort, which is really a particularly good habit. Of course, the premise of success can only be that we practice this project a lot.
So what good way do you have to get to the car? You are welcome to leave a message in the comment area.
The picture comes from the Internet, and the infringing contact is deleted.