For photographers, VSGO's air blowing is a good partner we always rely on, helping us solve the problem of a lot of dust. However, it is clear that VSGO is more ambitious, officially entering the daily cleaning market and launching the VSGO Storm Capsule V1 PRO. So what exactly is this product? Today we're going to have a simple out-of-the-box experience.
After opening the package, the product body appeared in front of us. The left part is the host + air filtration module, and the right part is the two-in-one tip + independent dust box.
The main engine uses a motor with a maximum power of 120W to ensure sufficient suction. It can work for 45 minutes in normal mode and 12 minutes in high power mode, and the battery life is quite enough.
On the front is a very simple button, the fan pattern button is used to switch the motor, there are 2 levels of strength adjustment. The buttons at the protrusion point are the two LED lights that control the product, which are used as emergency flashlights or to illuminate dead ends. The breathing light in the middle will light up while charging, telling the user that the product is currently being charged and that the product cannot be used during charging.
A USB-C port is used in the rear for charging. The VSGO Storm Capsule V1, which has been on sale before, uses a USB-A interface, and neither product compatibility nor charging speed can be well guaranteed, and has begun to be recalled. This also illustrates VSGO's pursuit of product quality. In addition to the charging interface, there is also a temporary boost button at the tail, if you encounter small things that can't be blown off/sucked away, you can press it.
So what can this product do? The first is electric air blowing. There is a blowout at the tail of the product, VSGO Storm Capsule can continuously blow, if the brightness of the blown place is not enough, you can also open the LED fill light for filling, so that it is more efficient than conventional air blowing. Because the air pressure of the blow is large enough, it can even be used to blow balloons or blow inflatable sofas.
The second function is air purification. The standard air filtration module has a built-in high-quality HEPA filter, which can block 0.3um of fine dust, so that there will be no secondary pollution during the blowing process.
When installed on the two-in-one tip assembly, it can be transformed into a "little Dyson" portable vacuum cleaner, the product suction force reaches 16000Pa, and the flat mouth tip and brush tip can be adapted to different environments for dust removal work. For places where there is a lot of dust inside the car but rarely cleaned except when washing the car, it can be cleaned quickly.
Since VSGO has designed a separate dust box, we can also dispose of garbage as easily as Dyson vacuum cleaners.
Overall, this versatile handheld vacuum cleaner is not only suitable for us photographers, but also for everyday home or car cleaning. Convenient and small at the same time the price is not high, the basic model 599, PRO model 629 price I think is quite worthwhile. If I could describe it in one word, it would be "little Dyson who can fit in my pocket", and this is the biggest feeling I have when I use it.
Although this is not an imaging industry product, we have seen a brave cross-border attempt by an accessory brand in the imaging industry, and the innovation efforts of this product are obvious to all. I hope that VSGO can continue to work hard to create more products that can make our lives better