When the road encounters a vehicle
Be sure to avoid blind spots!
Because when we're in a blind spot in a vehicle
The driver in the driver's seat
Really can't see it!
finish
untie
blind
district
When the driver is sitting in the driver's seat, part of the area outside the vehicle that cannot be directly seen due to the obstruction of the line of sight is the blind spot of vision. If the driver has insufficient knowledge of the blind spot of vision, it is very easy to cause traffic accidents.
Front of the car blind spot
When someone stays in the front of the car blind area, it cannot be seen in the cab, which can easily cause accidents.
It should be noted that when driving a car with a large body, the occlusion area and blind area are larger, and the driver should pay special attention.
Column A obscures the formed blind spot
The blind spot of vision created by the left and right columns of the front windshield glass will affect driving safety.
For example, when turning left, the left front column forms a blind spot several meters wide that will inevitably be located on the route of the vehicle, which has caused many vicious accidents of impact, rolling pedestrians and non-motorized vehicles over the years.
In order to avoid such accidents, when the vehicle turns left, the driver must turn to the left and view the traffic conditions of the road covered by the left front column from the left front window of the vehicle.
Vehicles next to it block the view
The outside of the left and right rearview mirrors, that is, the outside side of the body on both sides of the car about 30° from the driver position, is usually the blind spot of the rearview mirror. When the driver observes the left and right rearview mirrors and does not see other vehicles, it does not mean that there are no other vehicles behind the side of the vehicle, and other vehicles may have entered the blind area of the rearview mirrors of the vehicle so that the rearview mirrors cannot be seen.
At this time, the driver must turn his head to view the traffic situation behind the side of the vehicle through the side window of the vehicle, and the dangerous area of the blind area of the rearview mirror of the car can usually be observed through the side window.
In addition, the driver can install a small convex mirror in the corner of the flat mirror to reduce the blind spot.
Large vehicles should be equipped with front and bottom mirrors and side downview mirrors to reduce the blind area of the near body, and the vehicle can reduce or eliminate the blind spot of the driver's field of vision by adding rearview mirrors.
Rear blind spot
The area backwards of the trunk belongs to the rear blind area. Although most vehicles are equipped with reversing radar or reversing images, the radar also has corners that cannot be swept (such as the bottom of the car), and sometimes misjudged, so it cannot rely too much on electronic auxiliary equipment.
Before getting into the car, the driver should walk around the vehicle, observe the terrain and obstacles, and remember to look at the internal and external rearview mirrors when reversing.
Vehicle turning inner wheel difference
When the vehicle turns, the rear wheels do not follow the trajectory of the front wheels. The deviation formed between the turning radius of the front inner wheel is greater than the turning radius of the rear inner wheel is called the inner wheel difference, and the longer the body, the greater the inner wheel difference. The front wheel has bypassed the obstacle when turning, but the rear wheel may still hit the obstacle.
If you turn right, be sure to take into account that the right rear wheel may injure non-motorized vehicles or pedestrians on the non-motorized road.
When someone enters the blind spot of the vehicle
For drivers
Its danger index is no less than that of "driving with closed eyes"
therefore
Be sure to recognize the blind spots and be wary of them!