Preface
Previously, the charging head network has tested the performance of a number of Huawei's own or certified third-party brand chargers, and their charging power covers 22.5W, 40W, 66W, 88W, 90W, 100W, etc.
Recently, the charging head network got a Huawei 100W charger, equipped with a single USB-A port, which can support SCP 100W fast charging protocol.
Unboxing introduction
Huawei's 100W charger continues the classic design of a highly flame-retardant PC case with a shiny white finish and rounded edges.
The side is concave and easier to plug and unplug.
The output panel is equipped with a single USB-A port, with an orange female rubber core and the words "100W" and "HUAWEI SuperCharge" printed on the bottom.
The pins are still fixed for more stability on wall plugs or strips, and the input panel is also printed with the charger's specifications.
Model: HW-200500C01;
输入:100-240V~ 50/60Hz,2.4A;
输出:5v2a,10v4a,11v6a,20v5a max;
Manufacturer: Huawei Device Co., Ltd.
The matching A to C fast charging cable is bundled and fixed with environmentally friendly paper tape, the cable body is soft, and the skin-friendly TPE material is made of outer jacket, which has an excellent hand feel.
The shell and body of the wire rod have a thickened injection molding design, which is more resistant to swing and bending in daily use, and the word "6A" is printed on the shell of the sub-end.
The USB-C terminal has a non-full PIN pin design inside and is a classic orange color.
实测 A to C 快充线长度约为101cm。
The length of the Huawei 100W charger is about 54.95mm.
The height of the Huawei 100W charger is about 54.84mm.
The width (thickness) of the Huawei 100W charger is about 28.18mm. The size of the charger is about 54.95×54.84×28.18mm, the volume is about 84.92cm³, and the power density is about 1.18W/cm³ based on the charger power of 100W, which is quite good.
The Huawei 100W charger weighs around 126.2g.
Protocol testing
The pursuit of exploring the complete protocol is the significance of this test, and at the same time, it is convenient for users to choose equipment according to the specific protocol to achieve a better fast charging experience.
Combined with the matching A to C charging cable, the USB-A port of the Huawei 100W charger is measured using the POWER-Z KM003C to support fast charging protocols such as UFCS, FCP, SCP, QC2.0, and DCP.
When tested separately, it can read the UFCS fast charging protocol voltage level of the USB-A port, and supports five sets of UFCS fast charging ranges: 3.4-5.5V5A, 5.5-10V6.6A, 10-11V6A, 11-20V5A, and 20-21V4.7A.
When tested separately, the USB-A port's SCP fast charging protocol can be read, and Huawei's 100W charger supports multi-level intelligent adjustment between 3.4-21V 0.03-6A.
Product testing
Next, let's take a look at the specific experience of using Huawei's 100W charger. The charging head network will take you to understand this product in an all-round way from the aspects of compatibility test, charging whole process test, standby power consumption test, etc.
Compatibility testing
The compatibility test link can clearly know the charging situation of the charger for each device, and the charging head network will use dozens of models with chargers for testing, presenting real test data for readers.
Charging the Huawei Mate 60 Pro, the power read with the POWER-Z KM003C is 18.29 4.23A 77.45W.
Charging the iPhone 15 Pro Max, the power read with the POWER-Z KM003C is 5V 0A, it cannot be charged normally.
Summarizing the tested product data into a table, on the whole, most of the tested mobile phones have a handshake voltage of 5V and 9V, and only Huawei's own mobile phone can shake hands with a high voltage of 18V, and the charging power can reach a maximum of more than 77W; Game consoles, tablets, and laptops only run to the 5V voltage range.
Draw a histogram, it can be seen that the charger is the most compatible with Huawei's own mobile phones, all of which can reach more than 40W;followed by models that support UFCS fusion fast charging protocol,The overall charging power is about 23W;For other common mobile phones, the charging power is only about 10W;For Apple family buckets、Game consoles、Notebooks, etc., which only support PD fast charging protocol, cannot be charged,Overall, Huawei's USB-A port compatibility performance of Huawei's 100W charger is average。
Charging is tested throughout the process
Huawei 100W Charger The Huawei Mate 60 Pro was selected as the test object for the charging head network, and the Huawei 100W charger and the Huawei Mate 60 Pro were placed in a 25°C incubator and turned on the power supply, and the test results are as follows.
After turning on the power supply, shake the 18.5V voltage, the first 2 minutes the power is stable at about 79W, then the power drops to about 43-75W and continues to charge until the 10th minute, at the same time the voltage drops from 18.5V to 9V, then the power drops to about 18W and continues to charge until the 11th minute, then the power rises to 40W and charges to the 21st minute, then the power drops to 34W and charges to the 24th minute, then the power rises to 27W and lasts until it is full, and the charging process takes about 37 minutes.
Drawing a line chart, you can see that the Huawei Mate 60 Pro takes 12 minutes to charge the Huawei Mate 60 Pro to 50%, 23 minutes to 80%, and 37 minutes to 100%.
Let's see how the Huawei 100W charger performs when charging the Huawei MatePad tablet.
After turning on the power, shake the 18V voltage, the power is stable at about 87W for the first 46 seconds, then the power drops to about 60W and continues to charge until the 20th minute, then the power drops to about 56W and lasts for 27 minutes, then the power drops to 43W and charges to the 34th minute, then the power drops to 29W and lasts until 41 minutes, the voltage changes from 18V to 5V in 1 hour 05 minutes, and then the power continues to decrease until it is fully charged, and the charging process takes about 1 hour and 08 minutes.
Drawing a line chart, you can see that the Huawei 100W charger takes 21 minutes to charge the Huawei MatePad to 50%, 36 minutes to charge to 80%, and 1 hour and 08 minutes to charge to 100%.
Summary of the charging head network
The HUAWEI 100W charger continues Huawei's classic pure white glossy design, equipped with a single USB-A port, and the fixed pins are more stable, and supports HUAWEI 100W SCP Super Fast Charging + UFCS Fusion Fast Charging, but because it does not support the PD protocol, the compatibility with other mainstream mobile phones on the market or tablets, game consoles, laptops and other devices that only support the PD fast charging protocol is relatively average.
In the charging test, the Mate 60 Pro and MatPad Pro 13.2 were charged with a Huawei 100W charger, and both were able to shake hands with 88W super fast charging, which took 37 minutes and 68 minutes to fully charge, respectively. Overall, Huawei's 100W charger has a relatively good charging performance for Huawei's own mobile phones, and it can also be backward compatible with 66W, 40W and other fast charging protocols.