Alloy foil
The reason why the alloy foil needs to be treated with plasma surface is mainly due to the following considerations:
First of all, plasma surface treatment can significantly improve the surface properties of alloy foils. Through the action of plasma, a series of physical and chemical changes can occur on the surface of the alloy foil, such as the formation of a dense cross-linked layer or the introduction of oxygen-containing polar groups, so as to improve its hydrophilicity, adhesion, dyeability, biocompatibility and electrical properties. This improvement in surface properties helps the alloy foil to better meet specific functional requirements in subsequent applications.
Secondly, plasma surface treatment can effectively remove contaminants and oxides from the surface of the alloy foil. In the production and processing process of alloy foil, the surface will inevitably be contaminated with various pollutants and oxides, which not only affect the appearance quality of the alloy foil, but also can efficiently remove these pollutants and oxides, so that the surface of the alloy foil can be restored to a clean and smooth state.
Alloy foil
In addition, plasma surface treatment can also enhance the corrosion and wear resistance of alloy foils. Plasma treatment can form a dense oxide film on the surface of the alloy foil, which has excellent corrosion resistance and can effectively protect the alloy foil from environmental factors. At the same time, by adjusting the parameters and conditions of plasma treatment, the surface hardness and friction coefficient of the alloy foil can also be improved, its wear resistance can be improved, and the service life can be prolonged.
Finally, plasma surface treatment is an environmentally friendly and energy-saving surface treatment technology. Compared with traditional chemical treatment and mechanical treatment, plasma treatment does not require the use of a large number of chemical reagents and produces pollutants such as waste water and exhaust gas, which is environmentally friendly. At the same time, due to the high energy utilization rate in the plasma treatment process, it also has a high energy-saving effect.
In summary, alloy foils require plasma surface treatment mainly to improve their surface properties, remove contaminants and oxides, enhance corrosion resistance and wear resistance, and achieve the goals of environmental protection and energy saving.
Rotary spray plasma surface treatment machine
Shenzhen Hongzhan Automation Equipment Co., Ltd. is a company that has been focusing on the R&D and production of non-standard automation equipment such as automatic dispensing machines, visual dispensing machines, SMT high-speed dispensing machines, glue filling machines, automatic screw machines, soldering machines, plasma processing machines, etc., which are widely used in 3C electronics, semiconductors, new energy, automobiles and other fields, welcome new and old customers to negotiate!