Car oil change is a simple but important process, I believe after reading the article you will also understand how to replace the old and dirty oil in the car engine with new oil.
So, today let's discuss some insider tips on this subject that can help you get the most out of your oil change routine.
How long does it take to change the oil
Oil change times can vary depending on a number of factors. On average, it usually takes about 30 minutes to 1 hour to change the oil.
This time frame can be affected by various factors, such as the make and model of the vehicle, the skill level of the staff, and the availability of the necessary tools and equipment.
If you take your vehicle to a professional service center or dealership, they are experienced in changing the oil and can complete the oil change within the estimated timeframe.
If you want to save money deciding to change the oil yourself, it can take some time, especially if you're new to the process. What matters is how to perform an oil change correctly and safely, making sure that all necessary steps are followed, including draining the old oil, changing the oil filter, and filling the engine with new oil.
Ultimately, the time it takes to change the oil may vary, but with proper preparation and following the right procedures, you can also complete the task within a reasonable time frame.
What tools do I need to change oil?
Performing an oil change requires a specific set of tools and equipment to ensure a smooth and successful process.
Socket or wrench
To loosen and remove the drain plug from the oil pan, a properly sized socket or wrench is required. Dimensions may vary depending on the make and model of the vehicle.
Oil filter wrench
An oil filter wrench is used to remove the old oil filter. It comes in a variety of sizes and designs, so choose the one that matches your specific filter type.
Drain pan
When the old oil is discharged from the engine, an oil receiving pan is required to collect the old oil. Make sure the oil pan has enough capacity to hold all the oil coming from your vehicle's engine.
chimney
The funnel helps to inject fresh oil into the engine without spilling. It ensures accurate and clean oil filling.
Oil filter
In addition to the tool, a new oil filter for the car make and model is required. It is essential to change the oil filter every time you change the oil to maintain optimal engine protection.
Rags or paper towels
Prepare some rags or paper towels so that you can clean up any spills or wipe off any dirt or oil during the process.
Jacks and jack brackets (if required)
Depending on your vehicle, prepare a jack and jack bracket to lift and secure the vehicle if needed for access to the drain plug and oil filter. When using jacks and jack holders, it is important to follow proper safety procedures.
It is important to note that depending on the design of the vehicle and the manufacturer's recommendations, the specific tools required may vary. Before changing the oil, refer to your vehicle's owner's manual for any other tools or precautions specific to your vehicle model.
What happens if you don't change the oil filter
If you neglect to change your oil filter regularly, there are several potential problems that can affect the performance and longevity of your vehicle's engine, significantly increasing repair costs.
Reduced engine performance
Over time, the oil filter can become clogged with dirt, debris, and contaminants. Clogged filters can restrict oil flow, resulting in reduced lubrication and reduced engine performance.
Insufficient lubrication can lead to increased friction, heat build-up, and premature wear of engine components, which can affect overall performance.
greasy dirt
The main role of an oil filter is to remove impurities and contaminants such as metal particles, dirt and sludge from engine oil.
If the filter is not replaced, it will lose its effectiveness and these contaminants will circulate freely in the engine, leading to increased engine wear and potential damage.
Fuel efficiency decreases
Insufficient lubrication due to clogged oil filters can lead to increased friction within the engine. This friction requires the engine to work harder, which leads to reduced fuel efficiency and increased fuel consumption.
Engine damage
The buildup of dust, debris, and contaminants in motor oil can lead to the formation of sludge, a viscous, gelatinous substance. Sludge can clog critical engine passages, impede oil flow, and cause oil starvation in certain areas.
This lack of lubrication and increased heat can lead to serious engine damage, including wear of bearings, piston rings, and even engine seizure.
Expensive repairs
Neglecting to change your oil filter can lead to more serious engine problems over time. Repairing or replacing damaged engine components can be costly and may require significant labor and parts replacement.
To ensure the proper functioning and longevity of the engine, the manufacturer's recommendations should be followed. Follow the instructions and change the oil filter at regular intervals every time you change the oil.
This is a relatively inexpensive maintenance step that prevents major damage to the engine and costly repairs in the long run.