In recent years, with the continuous efforts of major manufacturers in the Android camp, Apple's iPhone has finally stopped squeezing toothpaste. Especially last year, the price of the iPhone13 in the case of configuration upgrades also dropped, which made many consumers call out the true fragrance.
September is getting closer and closer, which also means that iPhone 14 is about to meet with everyone, and there have been many revelations about iPhone14 on the Network recently, which also shows the industry and consumers' attention to iPhone 14.
Some insiders said that the four iPhones of the iPhone 14 series will use different screen suppliers, of which the iPhone 14 Pro Max will use LG and Samsung to mix, while the 14 Pro is exclusive to the Samsung screen, as for the 14 and 14 Max will use two or three suppliers, including the domestic BOE screen.
If this news is true, then it means that next year's iPhone14 series of screens need to be "drawn". Although with Apple's strength, there is a high probability that the screens from different suppliers can be tuned to a similar level, but the acceptance of consumers varies from person to person.
In fact, regarding the practice of mixed use of screens, there is also a precedent in the mobile phone industry, and some domestic mobile phone brands will mark the screen supplier on the outer packaging box to ensure the consumer's right to know.
On the other hand, according to the well-known Apple analyst Guo Mingji, this year's Apple iPhone 14 series will also use different chips. Among them, the iPhone 14 Pro and 14 Pro Max will be equipped with the latest A16 chips, while the iPhone 14 and 14 Max will continue to use the A15 chips in the old iPhone 13 series.
Considering the accuracy of Guo Mingxi's previous revelations, its credibility is very high. If its revelations are true, It is the first time that Apple has adopted different generational chips in the same generation of iPhones.
In addition, the A16 uses TSMC's 4nm process, but compared to the current 4nm process, the details should be optimized to make it have a higher energy efficiency ratio.
（ZAKER）