Click below to subscribe to the Beginner's Cheats Season 4 column to watch 50 episodes including this one
Spring Festival to drive a new car back to the hometown for the New Year, go to relatives to visit the door, you need to drive the car to the courtyard, and some suburban community gates are relatively narrow aisles are not wide, how to turn into the gate and will not scratch it? Today I will give you a real-life demonstration.
I first measured the width between the two piers, and the width of the three steps was about 2.7 meters, which was equivalent to the width of the gate.
Step by step to measure the width of the aisle by about 4.5 meters, and put a cone at about 4.5 meters to use as a temporary boundary. Let's take a look at whether a vehicle with a length of 5.3 meters can turn into the gate with a width of 4.5 meters in the aisle and 2.7 meters in width.
The vehicle drives from the aisle and hits the left to make a large circle using the maximum width of the aisle as much as possible.
From the other end of the aisle, you can see the vehicle driving to the left side of the vehicle, so that the left wheel is close to the left shoulder of the road, maximizing the use of the width of the aisle,
When the right rearview mirror is about aligned with the door pier, hit the full direction to the right,
At this time, looking out the window on the right side, the driver's line of sight just saw the door pier on the right side.
Continue to slowly turn to the right in the state of hitting the right full direction, pay attention to the alternating observation of the front and right rearview mirrors, and see the left door pier under the front windshield.
Continue to cover the door pier, no problem to turn over.
Take a positive look at the process of turning around. Keep the direction full to the right and continue to turn to the right,
You can see the vehicle slowly turning, the front left corner of the front of the car is very close to the door pier, almost at the limit distance to turn over.
Look at the space on the right side of the car body from the door pier is still relatively large, ok, now successfully turned over.
To sum up, the reason why this time I can turn over, the first makes full use of the width of the aisle, and at the beginning it hits the direction to the left, occupying a width of about 4 meters;
The second right direction is more accurately grasped, if it is later, the left front corner of the front bumper will scratch to the left door pier.
But when I finally turned in, the space on the right side of the body was a bit larger from the right door pier, and there seemed to be room for improvement. So let's try to challenge the closer distance again.
The vehicle drives along the middle of the aisle, trying to keep the left and right space of the aisle consistent,
From the opposite side, you can see that the vehicle is exactly in the middle of the aisle, and the left side of the body is about 1.1 meters away from the shoulder of the road.
This time, the time to fill the direction to the right is slightly earlier, and when the front wheel on the right side is aligned with the door pier, turn right in the direction of the full door,
From the front windshield of the car along the lower right corner can see the position of the door pier, with the right turn, the door pier in the left side of the move, until the front windshield under the middle can also be seen, indicating that you can turn over,
But at this time, the door pier below cannot be seen from the right rearview mirror,
Move forward a little, in order to prevent scratching, I pull the handbrake in the neutral gear, get off the car to observe, this get off the car to observe whether the old driver or novice, the key time to get off the car to observe do not feel faceless, if the scratch on that is really faceless, get off the car to observe once there will be a number.
By getting out of the car to observe, the distance between the front corner of the bumper and the door pier is consistent with the judgment, and it can be passed, and the distance between the right body and the door pier can also be passed.
Now back to the car can rest assured to continue to turn right to come in, you can see the left front bumper, turn over or so extreme,
However, the right side of the body is much closer to the door pier than the last time, and the right rear wheel is almost at the extreme distance from the door pier.
In the right rearview mirror, you can already see the process of the right body turning on the inside of the door pier.
By making two right turns into the gate, we summarize:
The first is to be able to use the road width as much as possible to use the road width, in the case of good road width conditions, play to the left direction close to the left limit position, expand the turning radius, and calmly enter the door;
Secondly, in the case of limited road width conditions, or there are obstacles on the left side of the road, it is also the use of conditions that can be used, within the available width range, a little in advance to the right, the width of the gate to make full use of the good, but also can complete the entrance;
The third is that in the case of no certainty, you can not blindly turn right, if necessary, get off the car to observe, get off the car to observe the first thing is to remember the neutral pull handbrake to prevent slipping accidents;
Finally, a reminder, I demonstrated the use of vehicle length of 5.3 meters, width of 1.8 meters, slightly larger than the size of ordinary family cars, this car can get by, your vehicle can also get by, but because of the model, height, sitting posture is different, the specific point please also test the use.
Dear old and new friends, a total of 50 videos of "Beginner Cheats - Season 4" have been updated