preface
Everyone knows that our charging head network has two public accounts of "charging head network evaluation room" and "charging head network", one is the main experience evaluation, and the other is mainly deep mining, facing different fan groups. Evaluation is how the process, this time not the table, this time for everyone to reveal how we dismantled, a visit often to dismantle their own dismantling brother.
Start at the studio
Students who have seen our review should have guessed that since the evaluation and dismantling are all photographed, a photography happy house is essential.
There are too many things in the studio that have not yet had time to disassemble, everyone wants to see what things to open the stomach first, may wish to bring it up, anyway, the little brother who burst liver dismantling will not pay attention to you...
Next to the storage shelf is the dismantling of the brother and the workbench, this workstation piled up too many product ashes and corpses, so that a solemn atmosphere swept over the face, Xiaobian really does not imply that the little brother has a fox smell, but the big guy's workstation is generally so debauched.
Blowing so much is mainly the little brother holding a hammer behind the author to supervise the work... Such a dirty and messy station charging head network is the only one, does not represent the general situation, we do not want to substitute other members Oh. After introducing the dismantling station, the following is a glimpse of the daily dismantling work from the dismantling tools.
If you want to do something good, you must first use it
Speaking of disassembling, the first thing you think of is definitely a screwdriver, a wrench, but the charger products are also known to everyone that the shell uses ultrasonic welding for the vast majority, and then it is also a glue bond, and it is not realistic to want to disassemble without loss.
Therefore, in addition to the common screwdrivers and pliers in the toolbox, all kinds of crowbars are dazzling, and a variety of hammers are at your disposal, with a large hammer of eighty and a small hammer of forty.
If you want to efficiently solve the product shell, the hammer is still not elegant enough, so the cutting machine and the tongs are also frequently featured in the disassembly video.
In the winter of heavy snow, the girlfriend received this warm fan heart are warmed ~ joke, the high temperature of two hundred degrees is not a joke, let's not imitate. The circuit boards in various electronic products want to unload eight pieces, and the hot air gun is definitely a big killer.
There is nothing to say about the soldering iron, handmade DIY is essential, and it is necessary to rely on it to dismantle things and put them back on. As for the pad, it is mainly to protect the desktop, and removing the charger is not removing the table.
From the scale to the vernier caliper, they are measured in dismantling. As for the POWER-Z tester, you can open a series to introduce a wave for everyone in the future, and everyone wants to see it in the comment area to tell us.
Finally, there's the photographic equipment, the full-frame Sony micro-single plus the folding studio, and the freshest ingredients often only need the simplest cooking tools. The old mage here probably knows too much more about this aspect than the author, so he will no longer get an axe here.
Conduct a dismantled talent show
Having said all this, I would like to break one for everyone.
First of all, the product must be measured, this dismantling is the original adapter of the iMac, Apple products have always been the nightmare of disassembling the brother, the workmanship is too solid.
The little brother who could not get off the hammer fixed the victim to the tongs and began to cut the shell with an electric mill. (*The goggles have been worn at this step, and no eyeballs have been injured in the cut.) ）
Pry open the housing of the power adapter below and record the video. Accidents often occur at this step, disassembly is not standardized, and the fingers are injured in two rows. Of course, not wearing gloves is mainly worried about not knowing the weight, prying the stick to pry the components, and hitting the dedication in the comment area.
In order to facilitate shooting, after opening the shell, it is generally necessary to clean up the fragments produced by the cutting, and this step runs through almost every operation below.
Then there are the PCBs that are shown to everyone in all directions.
Why it is a nightmare, the reason is here... In order to ensure that the components are printed clearly, they can only be cleaned in a physical way, and the clearance can often last more than half an hour.
The hot air gun can also be used to soften the glue, of course, first pad the board to avoid the barbecue studio.
After cleaning the glue, you can remove the components for everyone to shoot, and the dirt on some components needs to be cleaned separately.
The last step is to pose for a family portrait, which I believe everyone is familiar with.
After dismantling, the body will be packed in a plastic bag and will never see the light of day...
Dismantle the little brother under "dismantling"
The following is an interview under the interview, in addition to dismantling various digital products, but also often disassemble the finger disassembly brother, ask him a few questions that make people bleed.
Q1: In addition to disassembling the charger, what things will be disassembled?
A: Charging treasure, car charger, computer adapter, charging cable, Bluetooth headset, Bluetooth audio, and some devices about fast charging...
Q2: What do you like to disassemble the most? What do you hate to tear apart the most?
A: I like to remove the charger the most, because the principle is more familiar and easier to disassemble. More annoying Apple charger is worthy of the industry benchmark, especially difficult to dismantle.
Q3: Which disassemble product is the most impressive?
A: OPPO ultra-thin cookie charger, that was the one I hurt the most.
Q4: In addition to the charger in the comment area, everyone is most concerned about why you don't wear gloves to disassemble it?
A: Mainly do not like to wear - (don't say, let alone can not be judged) jokes, mainly a lot of things disassembled up by the feel, wearing gloves affects the operation, wearing gloves affects my hand speed, because to ensure their workload, this is an attitude.
Charging head net summary
At this point, the dismantling process has come to an end. Every boy may more or less like to "dismantle the house" when he is a child, and treating it as a profession is another scenario, which requires higher efficiency and a deeper understanding of the product, as well as a strong sense of safety, a strong sense of safety, a strong sense of safety, the focus is to say three times, we must not disassemble these digital products by themselves, can not be restored is secondary, capacitors, lithium batteries have the risk of fire and explosion.
Disassembly is to complex simple things in form, but in essence it is the opposite. Show the structure and principle of the product, analyze the composition and role of the components, and hope that our disassembly can help you understand the digital product industry better.
Everyone is still interested in which daily of the charging head network, may wish to leave a message area to tell us, next time continue to reveal the secret for everyone ~