Nowadays, most DIY players in the computer installation hardware requirements are demanding cost-effective, and for some DIY players who do not have large game needs, only need to check the display to cope, the cost of installation in this regard will also be reduced a lot, you can spend more budget on other accessories Hassan. So today is to talk about the good brother of the CPU "CPU heatsink". Of course, there are many radiator models on the market, but the inferior radiator with low price cannot suppress the temperature of cpu heating, which will also affect the normal performance of the computer. Therefore, it is very important to choose a CPU heatsink that suits your installation scheme.
The common CPU radiators on the market now are mainly divided into air-cooled and water-cooled, and for players who pursue that kind of extreme overclocking, water-cooled radiators are definitely their first choice. But the water-cooled radiator is very good in performance, but the cost is too high, the average player if there is no pursuit of extreme performance, in fact, air cooling is a very good choice, then the cost-effective CPU radiator how to choose? Here is a look at the wind radiator 2 of the cultivation of Amway.
When players choose CPU heatsinks, compatibility must be optimistic, and it is also the most critical point. If it is not compatible, the CPU will not be used directly. Of course, the Galvanic Wind No. 2 heatsink is compatible with most major CPU platforms, the Intel Socket 115X/1200/1700 (and supports Intel's latest 12th generation Core processors), and the AMD Socket AM4. In terms of size, the air-cooled radiator of Tillage Wind Power No. 2 is 130mm X 73mm X 156mm in length, width and height.
In terms of fans, it is equipped with a large 13cm fan, which can quickly discharge heat from heat pipes and fins. The fan uses hydraulic bearing technology to control the noise in an ideal state while discharging heat. At the same time, the fan can also achieve long life, rest assured to use. Equipped with PMW pulse width speed regulation, it can be adjusted according to the operation needs of the hardware, and it can run at full speed at full load to dissipate heat efficiently; Low-speed operation at low loads reduces noise. After actual measurement, the peak noise is only 39.5dB, which is full of noise that will not affect the player's daily use at all.
RGB has always been the player's favorite thing, Plough wind Power No. 2 has ARGB blessing Glitter, but also supports the motherboard 5V ARGB, the blessing of the magic lights makes the appearance of the radiator more gorgeous, but also can be matched with other hardware lights, so that the interior of the chassis is full of light.
Cultivating wind Power No. 2 air-cooled radiator also uses STT heat pipe direct contact through FIN process using STT heat pipe direct contact base and through FIN process, can increase the access CPU area in a large area, 4 hot copper tubes can transfer most of the heat to the fan to take away.
Overall, The Cultivator Wind 2 is a very cost-effective radiator with excellent heat dissipation efficiency, and it is definitely a good choice for players who want to install the machine cost-effectively. And other products of the cultivated brand are also very cost-effective, and players who like it may wish to understand it.