Previously at cess conference AMD released Radeon RX 6500XT and Radeon RX 6400 two 6nm desktop graphics cards, the first on the shelves of the RX 6500 XT equipped with Navi24 GPU, 1024 stream processors, with 18Gbps 4GB 64bit GDDR6 video memory. As a first-line manufacturer focusing on A cards for more than 20 years, at the first time of the official lifting of the new core, Dylan also officially released a non-public graphics card - Dylan RX 6500 XT 4G X Warlord.
The Dylan RX 6500 XT 4G X Battle will use a more advanced 6nm process, with the RDNA2 architecture, the energy consumption ratio is further improved, the power consumption is lower, and it is more suitable for some old platform upgrades that have been used for many years. The core frequency can reach up to 2825MHz, and the 4G GDDR6 high-speed video memory makes the graphics card have good performance and positioning the 1080p gaming experience.
The Dylan RX 6500 XT 4G X Battle will be equipped with a cold front dual fan cooling system, an extended fully nickel-plated dual heat pipe can quickly take away the heat of the GPU core, and a large number of heat dissipation fins effectively increase the heat dissipation area and improve the heat dissipation efficiency. In addition, the cold front dual fan cooling system also takes into account the heat dissipation requirements of the video memory and power supply modules, providing a good guarantee for the long-term full load output of the graphics card.
The front is equipped with 2 large-size fans, with a larger air volume at the same speed, which can quickly take away the heat on the heat dissipation fins in the low-noise operating environment; more support intelligent start-stop function, low load 0 rpm, high load full heat dissipation, players can also set their own temperature / speed curve in the AMD drive, to create the most suitable personality settings.
The Dylan RX 6500 XT 4G X-Battle will also be equipped with a full-size metal backplane on the back, the GPU position is designed with a hole, and the large opening at the tail of the back plate allows the wind flow to pass directly through the heat dissipation fins, which can also effectively improve the heat dissipation efficiency. The PCB and the backplane have made an integrated reinforcement design, and the multi-point fixing strengthens the hardness of the graphics card itself, avoiding the bending of the PCB due to its own weight after long-term use.
The Dylan RX 6500 XT 4G X-Battle will be equipped with dual interfaces of DP1.2 and HDMI2.1, supporting high resolution and supporting up to 8K video output.
The Dylan RX 6500 XT 4G X will also support several software technologies, including AMD FidelityFX Super Resolution and SAM Smart Memory, both of which are designed to improve game frame rates, which is especially important for this performance-oriented graphics card, as well as the latest technologies such as DirectX 12 Ultimate and ray tracing.
The Dylan RX 6500 XT 4G X Battle will be available now, and some players who want to experience new technologies but have a limited budget want to experience 1080P games with "5" full force and smoothness, and can consider changing the "core" of the game for their old platform.
(7855538)