Apple's new processor M1 Quadra, M2 exposed
Maximum 40-core CPU + 128-core GPU
According to the well-known blogger @dylandkt, the upcoming Mac Pro has not only changed in appearance design, but also transitioned from Intel to Apple Silicon on the chip. It is reported that the Mac Pro will not be equipped with the current M1 MAX, nor will it be equipped with the legendary M2 processor. It will most likely carry the epitaxial product of Apple's M1 chip, or named M1 Quadra or M1 Pro Max.
Currently, M1 Max is used on the 2021 14-inch/16-inch MacBook Pro, with a maximum 10-core CPU + 32-core GPU + 16-core NPU. The M1 Quadra will be paired with a 40-core CPU + 128-core GPU, surpassing the current Mac Pro's highest 28-core Intel processor (Xeon W-3275M). And even the dual-core M1 Max Duo has a 20-core CPU + 64-core GPU.
In addition, the blogger also broke the news that the new 14-inch MacBook Pro will use M2 chips and will arrive in the second half of 2022. The design of the device will be the same as the M1 Pro and M1 Max 14-inch models. It will replace the 13-inch MacBook Pro that first equipped with the M1, after all, the current 13-inch MacBook Pro still uses the Intel version of the mold.
It has been previously understood that the M2 processor is expected to use an 8-core CPU + 9/10-core GPU architecture, compared to the current 7-core or 8-core, and M2 Max may support up to 40-core CPU + 128-core GPU configuration combinations. The Apple M2 processor will be released during the WWDC Show in June.
The Samsung Exynos 2200 flagship chip was officially released
Powered by AMD RDNA 2 architecture Xclipse GPUs
Earlier, there was news that the Samsung Exynos 2200 would be postponed, but this morning, Samsung quietly released this flagship chip. It's a newly designed mobile processor featuring a 4nm extreme UV lithography process that redefines the user's mobile gaming experience with enhanced graphics and AI performance. It will enable the ultimate mobile gaming experience and enhance the overall experience and photography of social media apps. Currently, the Samsung Exynos 2200 is in mass production.
It is understood that the Samsung Exynos 2200 is one of the first products to integrate armv9 CPU cores, exynos 2200's eight-core CPU with a three-cluster structure design, consisting of a single powerful Arm Cortex-X2 flagship core, three performance and efficiency balance Cortex-A710 large cores and four energy-saving Cortex-A510 small cores.
The chip leverages Arm's comprehensive computing strategy and security-critical features to deliver the purpose-built computing and specialized processing needed to power the mobile experience of the future. And, the Exynos 2200 delivers more powerful device-side AI with an upgraded NPU. The Exynos 2200 also integrates a fast 3GPP Release 16 5G modem that supports sub-6GHz and mmWave bands.
In addition, the Exynos 2200's image signal processor (ISP) architecture has been redesigned to support the latest image sensors for ultra-high resolutions up to 200 megapixels, up to 7 independent image sensors can be connected and 4 simultaneously driven for advanced multi-camera setups, and for video recording, ISPs support up to 4K HDR (or 8K) resolutions. Exynos 2200's Advanced Multiformat Codec (MFC) supports 8K resolution and can decode 4K video at 240fps, or 8K video at 60fps, 4K video at 120fps, or 8K video at 30fps.
OnePlus Magnetic Rotating Camera Patent Publication
Rotate 180 to take a photo video
LetsGoDigital today unveiled a patent document for OnePlus' "Camera Modules and Electronic Devices," and according to the published technology patent, OnePlus may be developing a smartphone with a magnetic rotating camera on the back. As an advanced stabilization system, it is also possible to capture rotating shots and take photos from multiple angles. The patent shows an oversized camera on the back of the phone with a built-in rotation mechanism that allows users to take photos and record videos from a unique perspective.
LetsGoDigital has released a set of renderings of the patented product created by graphic designer Parvez Khan, and as can be seen from the pictures, the camera of the phone slightly protrudes from the fuselage, and the camera rotates around its own axis, so it does not further protrude the shell during the rotation. The camera system uses several magnets to ensure that the system can rotate 180 .
Since the camera can rotate 180 , users can easily change the composition and shoot from difficult angles. The rotating camera also enables panoramic photography and other functions. According to the patent documents, the rotary camera can also implement additional camera and panoramic photography functions, and in order to enable these functions, OnePlus will develop a special rotary shooting mode, although the details of this are not yet clear.
In addition to the rotation shooting mode, this unique OnePlus smartphone will also have a normal shooting mode, in which the camera module will be able to form a stabilization system with axial jitter, counteracting camera shake. The stabilization system also allows the use of slower shutter speeds to enhance the ability to photograph at night and at night. It's similar to Apple's sensor-shifted OIS image stabilization system, which debuted on the iPhone 12 Pro Max and is also used in the newer iPhone 13 Pro and iPhone 13 Pro Max.
Xiaomi Mi MIX 5 / vivo NEX 5 exposure
Outsole full-focal length lens, is expected to be co-branded with Leica / ZEISS
According to @digital chat station, Xiaomi MIX 5 and vivo NEX 5 will have outsole full-focal length images and good fast charging endurance solutions, and there are also joint cooperation. If there is no accident, vivo's camera co-brand partner is still ZEISS, Xiaomi has not yet been officially announced, it may be Leica.
For the past few years, Leica was the exclusive partner of Huawei's smartphone imaging until last summer. In May 2020, Sharp released the Sharp AQUOS R6 smartphone, equipped with a Leica certified 1-inch outsole camera. Its launch marks the end of Huawei's exclusive partnership with Leica. Since then, there has been news in the industry that a number of mobile phone manufacturers have contacted Leica to negotiate cooperation matters, including Xiaomi. Therefore, it is expected that the co-brand of Xiaomi MIX 5 is likely to be Leica.
According to the news, Xiaomi MIX 5 is equipped with a new generation of Snapdragon 8 processor, equipped with a new generation of under-screen fingerprint recognition technology, of which the ordinary version of MIX 5 uses a rear triple camera scheme, the main camera is 50 million pixels, supports 120 times zoom, the front uses a 48 million pixel high-definition lens, and the high-end version of MIX 5 is expected to be equipped with a periscope telephoto lens, up to 100 times zoom.
According to xiaomiui, Xiaomi MIX 5 Pro (L1) is close to release, Xiaomi MIX 5 and MIX 5 Pro are already in the final stage of development, but also registered the corresponding trademarks abroad. Recently, there is also news that the information of Xiaomi MIX 5 Pro was obtained through the code, and the content shows that the "MIPISEL" field appeared in the camera part, which has only been seen on the MIX Fold before, and the guess corresponds to the Xiaomi self-developed surging ISP, which is likely to be the surging C2 chip.
In addition, in terms of fast charging, the MIX 5 may be equipped with the 200W wired fast charging previously announced by Xiaomi, which only takes 8 minutes to charge 100%, pulling the wired charging into the 10-minute era for the first time.
The latest outbreak news
The source of data and information is based on @Health China Weibo, and the daily update time is between 9-11 o'clock
- January 17
Update on the new crown epidemic situation: At 0-24:00 on January 16, 31 provinces (autonomous regions and municipalities directly under the Central Government) and the Xinjiang Production and Construction Corps reported 223 new confirmed cases, including 60 imported cases and 163 local cases. There were no new deaths.
In the home cases:
-Tianjin 80 cases, including 79 cases in Jinnan District and 1 case in Dongli District;
-68 cases in Henan, including 60 cases in Anyang City, 7 cases in Xuchang City, and 1 case in Zhengzhou City;
-9 cases in Guangdong, including 5 cases in Zhuhai City, 2 cases in Shenzhen City, 1 case in Meizhou City, and 1 case in Zhongshan City;
- 5 cases in Shaanxi, all in Xi'an City;
-Guangxi 1 case, in Chongzuo City.
COVID-19 vaccination status: As of January 15, 2022, 31 provinces (autonomous regions and municipalities directly under the Central Government) and the Xinjiang Production and Construction Corps have reported a cumulative total of 2,933,485,000 doses of COVID-19 vaccine.
- January 18
Update on the new crown epidemic situation: At 0-24:00 on January 17, 31 provinces (autonomous regions and municipalities directly under the central government) and the Xinjiang Production and Construction Corps reported 171 new confirmed cases. Among them, there were 44 imported cases and 127 local cases. There were no new deaths.
-102 cases in Henan, including 94 cases in Anyang City, 4 cases in Zhengzhou City, and 4 cases in Xuchang City;
-Tianjin 18 cases, including 15 cases in Jinnan District, 2 cases in Xiqing District, and 1 case in Hexi District;
- 5 cases in Guangdong, all in Zhuhai City;
-Beijing 1 case, in Haidian District;
-Shaanxi 1 case, in Xi'an City.
COVID-19 vaccination status: As of January 17, 2022, 31 provinces (autonomous regions and municipalities directly under the Central Government) and the Xinjiang Production and Construction Corps have reported a cumulative total of 2,942,111,000 doses of COVID-19 vaccine.
Honor Route 4 free to send
『Hot Door Recommendation』