This content comes from @What is worth buying APP, and the views only represent the author's own |Author: Aunt Zhang Wholesale Department
In my computer applications, I always try to find a balance that delays the life of the hard drive as much as possible:
How can I use the data in the hard drive conveniently and extend the life of the hard drive as much as possible?
Recently, I have seen a lot of solutions on the Internet, and the best and best to use is actually a small program with a size of less than 100KB, and HotSwap can solve such a big and rare problem.
Check it out
HotSwap is a more secure solution for hard drives that are not easy to disassemble frequently, and considering that frequent removal of hard drives may cause physical damage to the hard drives.
Go beyond traditional enclosures and policy management solutions:
Initially, I considered using a third-party enclosure. However, I quickly discovered that this was not an ideal choice. Although the enclosure is technically able to solve the problem, I am still concerned that it can cause potential damage to the hard drive, especially during data transfer, and the external hard drive enclosure is not as fast as the hard drive installed on the computer:
In addition, the hard drive enclosure also required additional investment, which undoubtedly increased my usage cost.
Our traditional approach is to consider using a power management strategy to extend the life of the drive. We should all know that the lifespan of a hard drive is closely related to its power-up time and number of boots. Therefore, cutting off its power to reduce power-up time and number of boots is the essence of extending the life of the hard drive, which is more efficient and thorough than any good usage and maintenance.
HotSwap is free, compact, and ready to use when installed, and the software is stable, non-toxic, and ad-free.
HotSwap can add a software switch to the hard disk, support all WIN systems above XP, and the size of the software is only 70KB, which is less than one-tenth of a megabyte. It's very small.
The operation is very simple, the first time you use it click on "Hardware Change Scan". All current disks can be displayed.
Select the specified hard disk and click "Unmount".
The whole process is like removing a USB flash drive, "loading and unloading the hard disk in the machine" at any time. In fact, it can remove any disk device, support the removal of hard disks, USB flash drives, SD cards, discs, etc.
It works the same way we physically unmount a hard drive.
You don't need to shut down the power to keep the hard drive uncharged. Isn't it very easy to use.
Its function is not only to remove the hard disk to ensure the life of the hard disk, but also to achieve the purpose of energy saving. In addition to saving power, it also reduces the power consumption of the whole machine.