I don't know why bangs always grow very fast, and from time to time they reach the point where they need to be trimmed again, and what if you don't want to go to the barber shop especially for bangs? Let's take a look at how to cut bangs!
Essential tools for cutting bangs:
Scissors for hairdressing
In the past, many people would use stationery scissors to cut bangs, but the blade of stationery scissors is not suitable for cutting hair, not only is it easier to pull during operation, but the cut surface is also easier to split and look frizzy.
Flat comb
Cutting bangs often requires checking the range position and length, and a delicate flat comb is the easiest to handle.
Hair clips or hair ties
When it comes to separating the position of your bangs, you need to fix the rest of the hair strands at the back to avoid disturbing or cutting the wrong hair.
Steps to cut bangs:
1. Separate the range of the bangs
This step is very important, the range of bangs will determine the width and thickness of the bangs, the first time you cut it is usually decided by the hairstylist, you must remember to carefully distinguish the range of bangs when you fix your bangs, and would rather cut less than more. Comb the hair forward with a flat comb and part the excessively long strands to the sides from the middle to find the correct position of the bangs.
2. Fix the hair strands at the back
In order to avoid cutting mistakes and cutting more, it is recommended to fix the hair at the back so that it will not be accidentally cut, and if you have short hair, you can use a positioning clip, and it is recommended to tie up long hair directly.
3. Take out the middle position
Cutting bangs should also follow the principle of "a small amount and many times", take out a little bit of hair in the middle, cut a little bit of length, and slowly repair and practice, so that it is not easy to fail. According to my own experience, if it is so long that it is uncomfortable to cover the eyes, you can position the trim length below the eyebrows, which is a more marginal position.
4. Actual operation: intermediate
01. Decide the length you want to cut
02. Clip your fingers flat and cut it over
When grabbing the middle bangs, it is recommended to start with the middle handful and slowly grab more strands outward, which is better aligned and will not be cut too wide at once.
5. Hands-on: both sides
01. Grasp the middle and sides of the hair
02. Cut out the gradient diagonally
This step can help to create more consistent bangs, and it can also maintain the flattering effect on the sides of the hair.
6. Scissor tail end
If you feel that the straight flat cut line is too stiff, you can hold the scissors vertically and cut the hair slightly to make it softer. However, if you only scratch a small amount of hair, it usually won't feel too flat, so this step can be skipped depending on the situation.