At about 1:20 a.m. on April 30
In the staff dormitory building of a unit in Shihua Street
The fire is caused by the fact that the electrical appliance is not cut off when it is in use
After receiving the alarm
The fire department immediately rushed to the scene to deal with it
Fire and rescue personnel arrived at the scene and found out
The dormitory building is a 5-story brick and concrete structure with 2 staircases and 16 households
The fire point is located in Room 301 on the third floor of the dormitory
The main burning substances are daily necessities such as beds and clothes
Fire and rescue personnel arrived at the scene and organized forces to fight the fire as soon as possible
After all-out rescue
After about 15 minutes, the fire was extinguished
Fortunately, there were no casualties
After a preliminary investigation
The cause of the fire was:
Employees in the dormitory of the unit are in the process of using "Heat Up Fast".
The person left without losing the power, resulting in a fire and ignition of the surrounding combustibles
Staff dormitories are places where people live with a high concentration of people
There are many fire hazards, and there are many combustibles and large electricity consumption in the dormitory
So what should be done to prevent fire in the staff dormitory?
1. Do not use illegal electrical appliances
Illegal electrical appliances mainly refer to high-power or unsafe electrical appliances, such as fast heating, rice cookers, electric kettles, hair dryers, electric blankets, etc., the use of high-power electrical appliances in the dormitory is very easy to cause overload of wires, short circuits and fire accidents.
2. Do not connect or pull wires privately
It is necessary to standardize the circuit, avoid the wire passing through the combustible, use the socket and socket that meet the national safety and quality standards, manage all kinds of power plugs on the socket, and replace it in time if it is damaged, so as to avoid the fire caused by short circuit of the wire or poor contact of the joint.
3. Do not use open flames
It is strictly forbidden to light candles, mosquito coils, burn items, set off fireworks, etc. in the dormitory, and do not smoke in the dormitory.
4. Turn off the power in time when you go out
Before leaving the dormitory, be sure to check and turn off the power of electrical equipment such as lights and chargers to avoid fires caused by electrical appliances being powered on for a long time.
5. Do not occupy or block the fire evacuation channel
Safety exits, evacuation routes, and fire lanes are all "life lanes". Do not block doors and windows when placing items in the dormitory, do not pile up sundries in corridors and corridors, and do not set up anti-theft windows (nets) that block or affect evacuation in the escape window, and must ensure that the fire evacuation channel is unobstructed, and the safety exit is strictly forbidden to be locked.
At the same time, the unit shall strictly perform fire safety duties
Strengthen the fire safety management of staff dormitories
First, it is necessary to carry out special self-inspection and inspection
There are many people living in the staff dormitory, and most of them are migrant workers, and the management is relatively chaotic, and there are generally risks and hidden dangers such as weak fire safety awareness of employees, random use of fire and electricity, and large fire load in the dormitory, which is easy to cause casualties in the event of a fire.
The unit should carry out a comprehensive self-inspection of the staff dormitory, and mobilize the grassroots forces to carry out spot checks on the enterprise, especially the staff dormitory rebuilt by the plant, to strictly prevent the "three-in-one", and it is strictly forbidden to set up production, storage, business premises and office space in the staff dormitory building.
Second, it is necessary to strengthen the management of fire and electricity consumption
It is necessary to pay close attention to the outstanding problems of fire in the staff dormitory, especially in the spring cold wave and other weather, the use of fire and electricity is prominent, and it is necessary to focus on correcting the illegal use of electricity such as plug-in board series connection in the dormitory, unauthorized connection of wires, unauthorized disassembly and maintenance of electricity, illegal use of high-power electrical appliances, illegal parking and charging of electric vehicles, charging equipment for a long time and non-power outage when people leave, as well as illegal fire behaviors such as cooking with open flames, burning items, and smoking in bed.
Third, it is necessary to implement training drills for all employees
The unit should strengthen fire safety training for all employees, focus on strengthening employees' understanding of the fire danger of their posts and living places, improve fire safety awareness, and make all employees familiar with the use of fire extinguishers to extinguish small fires in the early stage and fire self-rescue and escape skills, so as to ensure that once there is a fire, they can escape and save themselves as soon as possible.
Fourth, it is necessary to strengthen emergency duty inspections
Enterprises should implement the main responsibility for fire safety, allocate full-time dormitory management personnel as required, strengthen day and night inspections, especially during the rest period of employees, and implement closed-loop rectification of problems found.
Finally, Ah Jin reminds everyone
Pay attention to the following issues when purchasing and using "Heat Up Fast".
So as not to change "hot fast" to "burn fast"
"Heat up fast" fire safety use instructions
1. Pay attention to quality problems when buying "hot fast" products
● Try to go to the big shopping mall to buy when buying, the quality of the big shopping mall is guaranteed, don't take your own life because of the cheap run;
● Pay attention to whether the product meets the national standards when purchasing.
2. Supporting qualified circuits
● When buying "hot fast", you should also consider the safety of the circuit at home, and look at the power when buying "hot fast".
3. Pay attention to the depth of water when using
● When using "Heat Fast", you must first fill the water over the "Heat Fast Heating Ring" and then plug it in. When the electric heating pipe starts to work, it should not be picked up and observed, so as to prevent the electric heating pipe from suddenly malfunctioning and leaking electricity and hurting people
Fourth, the heating time should not be too long
●When the water temperature reaches a certain temperature, the plastic submerged in the bucket will begin to soften, and if the heat continues, an accident will occur when the plastic can no longer withstand this temperature.
5. Do not touch the water temperature with your hands during the heating process
●Electric shock may occur when touching the water temperature when heating, if you need to unplug the plug to test the water temperature, the intelligent "hot fast" must unplug when the alarm sounds.
6. The old "hot fast" should not be repaired and used
●The bad "hot fast" is mostly due to the quality is not up to par or is used for too long, the heating pipe and wire have undergone qualitative changes, and the "hot fast" that is put together from east to west is repaired, and the danger factor is greater when used.