Steel five-column radiators are generally used for engineering use, and they should also pay attention to maintenance. Don't be overlooked because steel five-column radiators are used for engineering, which can also reduce the losses of enterprises. The valves on the steel five-column heating pipeline generally need to be debugged, adjust the valve of each riser to a suitable position, open the bleed valve, and discharge the air in the radiator until each radiator heats up and the debugging is completed. Once the commissioning is completed, the valve should be fixed and should not be opened and closed at will.
The steel five-column radiator adopts vacuum filling anti-corrosion, and the anti-corrosion is uniform and unlimited anti-corrosion. The appearance is made of imported all-polyester plastic powder spraying, bright color, no peculiar smell, green environmental protection. It adopts high-quality low-carbon precision steel pipe, adopts special welding process, and sprays high-grade electrostatic powder on the surface, which has full color and high gloss. It can be widely used in hot water heating systems of various buildings. The height and length of the radiator can be extended according to customer needs; The installation method is suspension and landing, and the design accessories are for customers to choose.
Common problems and treatment of steel five-column radiators:
1. Indoor air is dry, radiator smoked wall; Treatment method: Keep the radiator clean and the surrounding environment hygienic. Install a humidifier to increase the humidity of the space and avoid dust suspension.
2. The radiator is not hot; Check whether the heat source is normal at the first time. If it is normal, there is no air exhaust from a certain part of the pipe. At this time, it is normal to open the exhaust valve to discharge the gas. (Note: When opening the exhaust valve, be careful not to open too much, head side view to avoid burns)
3. Attention should be paid to the use of independent gas wall-hung furnace heating system; The water outlet of the heat source furnace should be higher than the height of the radiator water inlet. Avoid slowing down the water circulation in the radiator due to insufficient water flow pressure and affecting the use of heat dissipation.
4. Please follow the interface written on the package, that is, the interface told by the manufacturer. If the connection is wrong, it is not hot.
