ZTE officially confirmed that the new ZTE Axon40 series new product launch will officially arrive on May 9.
Now that new product launch activities are getting closer and closer, related product warm-ups and breaking news information is appearing in large quantities. More related content is also mentioned in today's latest warm-up.
It is reported that ZTE mobile phone today officially announced the appearance design scheme of the new ZTE Axon 40 series.
Combined with the picture, ZTE Axon40 Pro adopts a central punched screen, curved screen design, and narrow upper and lower borders. This makes the front visual effect very good. The power button and volume adjustment button are placed on the right side of the fuselage.
In terms of fuselage design, this new machine has a rectangular camera module on the rear, and the module is also divided into two circular areas. A large main camera is visible in the upper ring, two slightly smaller lens assemblies are visible below, and a smaller lens and flash assembly are visible outside the ring area.
Official information shows that ZTE Axon40 Pro will be equipped with a 100 million pixel HD main camera. This also coincides with the large-size main camera information displayed in the real machine picture.
The exterior design of the ZTE Axon40 Ultra was also officially announced.
Combined with the official poster, the ZTE Axon40 Ultra comes with a complete front screen. The bezels on the top and bottom of the screen and on both sides are relatively narrow, which gives it a fairly impactful frontal display.
The introduction shows that the new ZTE Axon40 Ultra will be equipped with an off-screen front camera solution. Upgraded one-wheel-drive one technology, combined with self-developed pre-camera algorithm 3.0, 16MP + 2.24μm fusion of large pixels, a new 400PPI flexible under-screen camera technology, full-screen blue diamond arrangement, bringing better screen display effect.
At the same time, the physical volume buttons and power keys of the ZTE Axon40 Ultra are placed on the right side of the fuselage, and the rectangular camera module is placed in the rear. The design of the rear camera module is different from that of the ZTE Axon40 Pro, which is vertically arranged with three camera combinations.
The first two shots are close in size, and official spoilers also show that the ZTE Axon40 Ultra is equipped with two IMX787 outsoles, bringing more than twice the flagship influence.
At the same time, the ZTE Axon 40 series will be equipped with a standalone security chip to protect user privacy and security at the hardware level. ZTE Axon40 Ultra is equipped with a new generation of Snapdragon 8 flagship platform, with super dual-way VC liquid cooling heat dissipation, the overall performance is upgraded.
As the release of the new machine approaches, there should be more news in the future. As for the complete appearance and pricing information of the new machine, it is necessary to go to the launch event to understand.