As an important part of the overall performance of the car, the car chassis plays a decisive role in both the safety and comfort of the car. When we usually drive on the road, we often encounter some sections that damage the car chassis, and these few places can be described as the terminators of the car chassis, and we must not be hard after seeing it!
When a truck drives by, the huge pressure can easily crush the road surface, thus forming a large pit. These large pits differ from speed bumps in that they are raised and can be seen from a great distance. The big pits on the road are basically difficult to see, and when we see them, the brakes are too late.
Many car owners will choose to brake sharply in front of the pit in order to avoid damage to their car, but if the depth of the pit is relatively large, it is still impossible to avoid the car chassis scraping to the ground, causing damage to the chassis. Therefore, when we drive on unfamiliar roads, we must slow down and slow down, and observe the road conditions at any time to avoid a large pit suddenly appearing.
In addition to the large pits on the road that cause great damage to the chassis of the car, those large stones are also invincible, and the lethality is also very large. For example, when we drive behind a large truck, a large stone is likely to fall on the big truck at any time, if we do not pay attention to the chassis when driving, it will cause the chassis to leak oil, which is very dangerous. Therefore, when we are driving on the road, we must try to avoid following the big car, and we must pay attention to the road surface at any time, and if we find foreign objects such as large stones, we must avoid them in advance.
When we usually drive on the road, we will inevitably encounter some muddy roads, such roads can easily be crushed into the middle high and low terrain on both sides. If we follow the marks of the car in front of us, it is easy to get stones to hurt the chassis. So when we drive into a dirt road, it is best to take a detour, if you can't get around, try to straddle, and pay attention to low speed driving, so that the engine can output more torque.
After talking about the above chassis terminators, finally let's talk about the damage of the speed bump to the car chassis. Some car owners think that the chassis of the car is high, do not pay attention to the speed bumps on the road, and often quickly pass the speed bumps. But even if the chassis of the car is high, such a rapid rush through the speed bump will have a great impact on the vehicle suspension, and over time it will cause great damage to the car suspension. And if the car speed bump is very high, when we quickly pass the speed bump, the phenomenon of "bumping" the chassis will occur, and the damage to the car chassis is very large.
Therefore, when we drive through the speed bump, we must reduce the speed in advance, and keep the two wheels together through the speed bump. This is done to balance the impact forces on both sides of the tire, so that the left and right suspension systems are balanced by the force, thus minimizing injury.
When you usually encounter these chassis terminators on the road, you must drive cautiously so as not to damage the chassis of the car.