On March 22, Stone Technology officially released the new G10S series of intelligent sweeping and dragging robots, providing users with convenient and intelligent one-stop cleaning services.
Stone Technology G10 sweeping robot base station can make G10 to achieve automatic water replenishment and automatic cleaning and other functions, and now the stone G10S series of base stations have been significantly upgraded, becoming a 7-in-1 high-energy base station, high-energy base station integrated automatic dust collection, automatic washing and mop, automatic water replenishment, base station self-cleaning and automatic bacteriostatic five functions, and optionally increase the function of automatic drying and automatic water supply and sewage.
Stone G10S series cleaning when the suction force up to 5100Pa, after the completion of the cleaning can let the base station automatically complete the dust collection work, the base station built-in 2.6L of large dust bags, can allow users in up to 60 days do not need to do manual ash pouring operation, dust bags using sliding dust bag mouth sealing design, after the use of the dust bag only need to pull to make the dust bag automatically sealed, there will be no dust leakage problem, the filter level reached E12, the dust is easy to allergic users can also be assured to use. While taking into account the high-intensity suction force in the dust collection process, the noise can be reduced as much as possible through the acoustic principle, so as to avoid the impact of the noise emitted during dust collection on the user's daily life.
The self-cleaning function of the base station is realized by clear water and self-cleaning brush and mop cloth scraper, clean water will spray water evenly from 9 holes longitudinally to ensure that each area of the mop can be covered in place, the self-cleaning brush can be cleaned at a rotation speed of 600 rpm, and the mop scraper adopts an elastic pressurized design to effectively ensure the cleaning force.
Not only the mop can be self-cleaning, the stone G10S series base station itself can also achieve self-cleaning function, the sink has a built-in one-way scraper strip, which can automatically scrape the sewage in the cleaning tank to avoid hiding dirt and grime, and the sink filter adopts a double-layer design and supports disassembly, which is convenient for removing the base ash, and can also filter out the garbage of large particles. At the same time, the water tank of the base can monitor the state of no water and the presence through the internal float Hall sensor, which can prompt the user to add water or dump sewage to the water tank in time.
Moreover, the clear water tank in the base station has a built-in silver ion module, which can ensure that the clear water tank achieves 99% of the sterilization effect, such as the optional drying pile can make the mop dry by hot air, and after the optional water exchange device, the base station can also realize the automatic replenishment of the water tank, the automatic drainage of the sewage tank, the automatic addition of cleaning liquid and other functions.
Not only the base station is fully upgraded, G10S series sweeping and dragging robot itself also has many upgrade highlights, first of all, the G10S series in the industry took the lead in realizing the structural design concept of combining the liftable tow plate and the sonic vibration wiping module, the sweeping and dragging robot can independently switch the automatic lifting mode in a variety of working states, and the mop can reach 3000 times of high-frequency vibration through the high-performance brushless motor, which can effectively disintegrate the ground stains, and the cleaning ability has increased by 4 times. And users can also customize the wiping strength and wiping mode for each room in the APP according to the dirty situation of the environment, and the APP also adds a "fine wiping" mode, which can be quietly run while effectively improving the wiping ability.
Secondly, the stone G10S adopts a floating module with four connecting rods independent suspension and a brushless motor integrated design, which allows the mop to fit the ground more smoothly. The brushless motor brings the function of lifting and lowering the tow plate, peristaltic pump spraying water and vibrating the floor.
In terms of map navigation, the stone G10S series was upgraded to the RRmason 9.0 system, adding structured light active ranging obstacle avoidance function, supporting infrared light for millimeter-level 3D structured light ranging, even in the environment of optical fiber, G10S series can also be obstacle avoidance, when detecting obstacles, G10S series can also integrate LDS map information, marking the corresponding location of obstacles on the map, indicating that there are obstacles here for obstacle avoidance. If the mobile phone with the stone APP is an Apple device equipped with a dToF radar sensor such as the iPhone 13 series, it can also realize the scanning and three-dimensional mapping of the home environment, and output the house restoration model built by the grid map. By fitting the algorithm, it is organically fitted to the sweeper map to create a model in which the sweeper can run the display. It is worth mentioning that the G10S Pro also has a built-in camera, which can realize visual recognition and video call functions, and can more intuitively observe the cleaning process of the G10S Pro remotely.
In addition, the Stone G10S series supports four kinds of voice operations of Xiaoai speaker, Xiaodu speaker, Tmall Genie and Siri Shortcut, which basically covers the mainstream smart speakers in the domestic market, and voice control has become quite useful.
More versatile base stations, more efficient cleaning and smarter navigation make the Stone G10S series a more convenient experience, if you are struggling with hygiene work at home, the Stone G10S series may be able to become a powerful leader in your home cleaning and hygiene.