Following the launch of the new flagship product pixel 6 series of the Pixel series by Google in October last year, it has also received a lot of attention from the outside world with the application of a large number of new technologies and changes in product positioning. Although the Pixel 6 series model has not been on the market for a long time, a few days ago, sources have exposed the relevant information of its subsequent products, among which the CAD 3D model drawing of the Pixel 7 and the product rendering of the Pixel 7 Pro have also appeared.
According to the product appearance information exposed this time, the Front of the Pixel 7 series fuselage is still used in the open screen, the opening position is also located in the center of the top of the screen, and it also has a good performance in terms of screen ratio. Above the central axis of the back of the fuselage, the two models are also placed in a horizontal rear multi-camera module, and continue the appearance design of the current model. The pixel 7's fuselage size may be 155.6×73.1×8.7mm, which is smaller and thinner than the Pixel 6, and the top of the fuselage may also be set or a hole for the 5G millimeter wave antenna.
Previously, there were rumors that the Pixel 7 series models will continue to be equipped with Google's new self-developed master control, and will also bring further improvements in performance, but in terms of appearance, from the current stage of the breaking information, it may not change much. As for the specific product details of the new series of machines, it is yet to be confirmed by the follow-up further news, so interested friends may wish to continue to pay attention.
【The picture of this article comes from the network】