With xiaomi officially confirming that it is about to launch the Iteration of Redmi K50 series products, more and more related revelations and spoiler information have begun to appear in front of everyone.
However, in addition to the iteration of the new generation of Redmi K50 series, the corresponding news also mentioned other high-end positioning products under Xiaomi.
In the first half of last year, Xiaomi launched Xiaomi 11, Xiaomi 11 Pro, and Xiaomi 11 Ultra, three flagship products with different positioning. In the past Xiaomi new product release activities, Xiaomi launched three new product versions of Xiaomi 12 Pro, Xiaomi 12 and Xiaomi 12X.
Based on this, many speculate that Xiaomi is expected to bring a new Xiaomi 12 Ultra "super cup" with higher positioning in the next step.
In previous news, the appearance rendering of the suspected Xiaomi Mi 12 Ultra and the picture of the product protective case have been exposed.
Combined with the details shown in the exposé, Xiaomi redesigned the fuselage backshell scheme for this new machine. It has a rectangular area in the upper part of the rear of the fuselage, and a circular lens module is placed above this area.
It is interesting to note that in the circular rear camera module, it can be seen that it has built-in multiple lens components, and the number of lenses is about 4, including a square periscope lens.
However, regarding this generation of new products, the latest revelations give other different product design details.
Blogger @ Digital Chat Station Mentioned in the latest breaking news, "The network map is not right, the l1 series is a rear high-quality full-focal length triple shot, the left is a 50mp super large bottom main shot, the bottom is a periscope, and the middle is an ultra-wide angle (macro). Square matrix bulge is fine, round module bulge is a bit serious ~"
It is reported that Xiaomi's new machines codenamed l1, l2 and l3 are all subordinate to the Xiaomi 12 series. The l1 mentioned in the above message is one of the oversized cup versions, that is, the Xiaomi Mi 12 Ultra.
Combined with the content mentioned in this leak, the design of the Xiaomi Mi 12 Ultra transmitted on the Internet is different from the actual product, and it is followed by a three-camera combination, rather than the four-camera or even five-camera scheme displayed in the exposé.
But this revelation also confirmed the general appearance outline of the Xiaomi Mi 12 Ultra from the side.
Close to previous product renderings, it is equipped with a combination of square and circular modules. Among them, the degree of convexity of the square matrix is "fine", and the bulge of the circular module is somewhat serious.
Under such a rear camera module design, it is equipped with a high-quality full-focal length triple camera combination, including a 50-megapixel super-low main camera placed on the left side of the module, an ultra-wide-angle (macro) lens in the middle, and a periscope lens located below the module.
According to the information mentioned in several leaks, the overall body design of the Xiaomi Mi 12 Ultra is close to the previous revelations, but the rear camera module is only set up on the left, middle and bottom of the lens components, and the actual opening should be less than the previous rendering.
In addition, previous revelations have shown that the new machine code-named L1 "cannot catch up with sm8475 from the scheduling point of view, and the current measurement is still sm8450." However, the latest news mentions Xiaomi's sm8475 new machine.
According to the information displayed in the breaking news, Xiaomi is polishing a new sm8475 machine, but more specific product information has not been announced. At the same time, a device suspected of being a derivative of the Xiaomi Mi 12 Pro (model l2s) has also begun to be tested.
It is reported that the SM8475 mentioned in the breaking news will be Qualcomm's flagship core based on TSMC's 4nm process. But the new Xiaomi machine equipped with this chip has not yet seen more accurate news.