The iPhone 13 series mobile phones have been double-upgraded in appearance and hardware, and the iOS 15 system on board has also made many changes in functions, but it still frequently explodes various problems. Some time ago, it also appeared on Weibo's hot search because of the "red and green two-color screen" problem.
Recently, some users have reported that their iPhone 13 often fails in the process of use, opens the App or other interfaces to lag, and even freezes and turns black when it is serious, and the forced shutdown is useless.
Has your iPhone 13 ever experienced a similar situation? Don't worry, the iPhone 13 screen stuck or black screen problem may be related to the power supply of the device, or it is also very likely caused by the iOS system.
Before going to an Apple aftermarket repair center, here are 3 solutions you can try:
Method One: Force restart iPhone
If your iPhone 13 just has a screen stutter, stuck problem, you can't use the screen to operate and can't shut down, the fastest fix is to force restart the device.
Force restart iPhone 13: Press and quickly release the volume up button, then install and quickly release the volume down button, and finally press and hold the side button until the Apple logo appears on the screen.
Method two: iOS system repair
If your iPhone 13 has completely stuck black screen and forced restart doesn't work, you can try to fix your iOS system. For example, Fengke iOS System Repair Tool can help users easily fix various iOS system problems, including iPhone stuck, black screen, white screen, non-stop restart, can not boot, stuck in recovery mode and so on.
The operation of this software is also very simple, you may wish to try:
Step 1: Download and install Fengke iOS System Repair Tool on your computer. After running the program, select "Standard Mode".
Step 2: Connect your iPhone 13 to your computer via a data cable, the program recognizes the device and clicks "Download" to download the firmware.
If the program does not recognize the iPhone 13, follow the on-screen prompts to put your device into recovery mode or DFU mode.
Step 3: After successful firmware download, click on "Start Repair". The whole repair process takes about 10 minutes, be careful not to disconnect the device.
Method Three: Check the iPhone 13 Power Supply
As mentioned earlier, the iPhone 13 black screen jam is most likely caused by power problems. Therefore, it is recommended that you check the power supply. First check the iPhone charger to see if the charging cable and adapter are damaged. You can then try charging your device for at least 30 minutes using a different charging cable and adapter until the battery icon appears on your phone screen.
If none of the above methods solve the black screen stuck problem of your iPhone 13, it is best to take the device to the Apple after-sales center or authorized repair point for detection and repair.