laitimes

A high-speed bridge in Hubei overturned, industry insiders: it may be caused by overloading

Source: Health Times Chen Longfei

At about 16:00 on the afternoon of December 18, the bridge between the Shanghai-Chongqing Expressway and the Daguang Expressway in Ezhou, Hubei Province, collapsed. As of 18:32, the scene caused 3 deaths and 4 injuries.

According to the relevant person in charge of the Ministry of Transport, the ramp bridge was a one-column pier bridge, the bridge was not constructed at the time of the incident, but there were three trucks driving in the same direction, one of which was a large transport, weighing 190 tons, and the relevant situation was being further verified.

A construction industry practitioner who did not want to be named told Health Times that from the on-site video and photo footage, the bridge deck is complete without cracks, the bridge pier section is flat, and the bridge is collapsing as a whole, so it should not be a bridge quality problem.

A high-speed bridge in Hubei overturned, industry insiders: it may be caused by overloading

Picture according to CCTV news

The above-mentioned personnel analysis, "from the current scene photo analysis, the bridge rollover is mainly caused by two factors: one is that the vehicle is overloaded, the vehicle is too heavy, which will cause the center of gravity to be biased to one side, resulting in the collapse of the bridge; the second is that the design scheme has some problems in today's specifications." For bridges supported by single piers, the piers are set in the middle, and overloaded vehicles driving on one side of the lane are prone to eccentric loads to produce overturning forces, resulting in rollover and overturning. ”

However, the design code is in line with previous industry specifications, which were currently revised in 2018.

At the same time, the industry insider suggested that in the blank period of the specification design requirements, there are still similar design problems in the domestic bridge, and it is still in operation, the rollover incident should cause reflection, it is recommended that such a bridge be checked, one is to limit the weight, prohibit overweight vehicles from driving on the viaduct in the city; the second is to call on the relevant departments to investigate this and strengthen the bridge with problems.

A high-speed bridge in Hubei overturned, industry insiders: it may be caused by overloading

Read on