What is the IEC certification standard for the export of e-mobility equipment accessories to the EU CE certification?

Accessories for e-mobility equipment

Batteries for e-mobility devices

Stand-alone replacement batteries for e-mobility devices. An e-mobility device battery includes any battery (original or non-original) that is sold separately as an accessory to an e-mobility device.

NOTE: Some types of replacement batteries do not have a CE or UKCA mark. These products are not eligible for sale on Amazon. Example: A stand-alone lithium-ion battery with no additional electronics (e.g. overcharge protection).

Chargers for e-mobility devices

Stand-alone chargers for e-mobility devices. E-mobility device chargers include any charger (original or non-original) sold separately as an accessory for e-mobility devices.

E-mobility equipment retrofit kits

Any retrofit kit that includes a battery and/or charger. An e-bike or e-mobility device conversion kit is a set of components that converts a regular bicycle into an e-bike, or a scooter or skateboard into an e-mobility device. Depending on the model, they typically include in-wheel motors, controllers, and displays.

Replacement batteries or chargers for e-mobility equipment retrofit kits

Replacement batteries or chargers for e-mobility equipment retrofit kits. This includes any original or non-original chargers that are sold separately as accessories for e-mobility equipment conversion kits.

Our policy on accessories for e-mobility equipment

Amazon requires that all e-mobility device accessories be tested and comply with the following regulations, standards, and requirements:

commodity	Regulations, Standards and Requirements
Replacement batteries for e-mobility devices	All of the following regulations: EMC 2014/30/EU（电磁兼容性指令） RoHS 2011/65/EU（有害物质限制指令） UN 38.3(锂离子电池的运输测试) and the following, if applicable: EN 50604-1:2016+A1:2021 (Rechargeable lithium batteries for lightweight electric vehicle applications - Part 1: General safety requirements and test methods EN IEC 61959 (Rechargeable battery cells and batteries containing alkaline or other non-acidic electrolytes. Mechanical Testing of Sealed Portable Rechargeable Battery Cells and Batteries) EN IEC 61960-3 (Rechargeable battery cells and batteries containing alkaline or other non-acidic electrolytes. Rechargeable lithium battery cells and batteries for portable applications. Prismatic and cylindrical rechargeable lithium battery cells and batteries) EN IEC 62133-2 +A1 (Rechargeable battery cells and batteries containing alkaline or other non-acidic electrolytes. Safety requirements for portable sealed rechargeable battery cells and batteries in portable applications. Lithium system) EN IEC 62471 (Photobiological Safety of Luminaires and Luminaire Systems)
E-mobility device retrofit kit with battery
Replacement batteries for e-mobility equipment retrofit kits
E-mobility device wall chargers	All of the following apply: LVD 2014/35/EU（低电压指令） EN IEC 50563 (External AC DC and AC Power Supply. Determine the no-load power and average efficiency in active mode) EN IEC 55014-1 (Electromagnetic Compatibility. Requirements for household appliances, power tools, and similar equipment. Emissions) EN IEC 55014-2 (Electromagnetic compatibility. Requirements for household appliances, power tools and similar equipment - Immunity. Product Set Standard) EN IEC 60335-1 (Household and similar appliances. General Safety Requirements) EN IEC 60335-2-29 (Household and similar appliances. Specific safety requirements for battery chargers) and the following, if applicable: BS EN IEC 62471(灯具和灯具系统的光生物安全性)
E-mobility equipment retrofit kit with charger
Replacement chargers for e-mobility equipment retrofit kits
Car chargers for e-mobility devices	All of the following apply: LVD 2014/35/EU（低电压指令） EMC 2014/30/EU（电磁兼容性指令） RoHS 2011/65/EU（有害物质限制指令） EN IEC 61439-7 (Low-voltage switchgear and control unit components - Part 7: Purpose-specific components such as marinas, camping sites, market squares, electric vehicle charging stations) EN IEC 61851-1 (General Requirements for Conductive Charging Systems for Electric Vehicles) EN IEC 61851-21-2 (Conductive charging systems for electric vehicles. Requirements for conductive connections between electric vehicles and AC and DC power supplies. Electromagnetic compatibility requirements for EV charging systems outside the vehicle) EN IEC 61851-22 (Conductive charging systems for electric vehicles. AC Electric Vehicle Charging Station) EN IEC 62196 (Plugs, Receptacles, Vehicle Connectors and Vehicle Jacks. Conductive charging of electric vehicles. Dimensional compatibility requirements for AC contact pins and contact tube fittings) EN 62752:2016+A1:2020 (In-Cable Control and Protection Devices [IC-CPD] for Mode 2 Charging of Electric Road Vehicles)

Your detail page must include the following information:

• Model number, part number, or item number

You must submit the following information:

File:

• A Declaration of Conformity (DoC) issued by the manufacturer, brand owner, or importer indicating that the product complies with the regulations, standards, and requirements listed above. The document must contain the name, duties, and signature of the person responsible.
• A test report from an accredited laboratory certifying that the product complies with the regulations, standards, and requirements listed above.

Image:

• Model number, part number, or item number
• Name and address of the manufacturer, importer, distributor or authorized representative
• Trade manuals and manuals
• CE marking

Note: All documents, test reports, or certificates that you provide to Amazon must be authentic and in their original format (i.e., unmodified).

When submitting images or files with images, make sure that the following requirements are met:

• The picture is clear and easy to read
• The image proves that the product is identical to the inspected product and the product listed on the product detail page
• Product manuals, manuals, safety information, labels, and warnings are in the language of the country in which they are sold
• If the product is a bundle or bundle, provide an image for each product included

Note: If possible, provide images of all sides of the product or its packaging to ensure that it meets the requirements and to reduce the likelihood of delays in the approval process.

Customer safety is our top priority. We reserve the right to request additional information from you at any time in order to verify product safety and compliance.

Professional product testing and certification in various countries, one-stop service,

If necessary, please pay attention to the official account "Ayue Detection", thank you for your support