Remember last week's review of the mechanical revolution Jiaolong 15K? The price of 4999 yuan sells you RTX 4060, and the cost performance is simply perverted.
Can defeat the mechanical revolution in terms of [cost performance],Only the mechanical revolution itself,The new Jiaolong15ProPrice5049element,The screen is upgraded to2.5KHigh resolution,The memory has been upgraded from the previous dual8GB to a single bar16GB。
The fuselage shell has also been upgraded from all-plastic to A-side metal.
So how does this computer perform in practice?
Today we will briefly analyze:
Mechanical Revolution Jiaolong 15Pro
Left side of the fuselage
The right side of the fuselage
Rear fuselage
It is configured as follows:
R7 7435H processor
RTX 4060 8GB 独立显卡（140W）
16GB DDR5 4800MHz 内存
512GB SSD
15.6-inch 2560×1440 resolution, 100% sRGB color gamut, 165Hz refresh rate, IPS screen
厚度 19.8~23.9mm
The inlet style grid thickness is 26.6mm
Weight 2.18kg
The adapter weighs 623g
The reference price is 5049 yuan
Its advantages and disadvantages are as follows:
Merit!
1. Very cost-effective
2. The performance release is better
3. The number of interfaces is abundant
Shortcoming!
1. The keyboard temperature is higher under high load
2. The adapter is heavier
3. The D shell has a heavier plastic feeling
【Upgrade Suggestions】
This laptop is not difficult to disassemble, and the back cover can be removed by removing all the screws on the bottom surface.
A single 16GB DDR5 4800MHz memory is sufficient for most applications, and the machine has two memory slots, so you can add your own memory if needed. The SSD capacity is 512GB, the model YMTC PC411 supports PCIe4.0×4 and NVMe, and the machine also has a 2280 M.2 slot, which can be installed with an SSD if necessary.
【Purchase Suggestion】
1. The requirements for cost performance are very high
2. There are certain requirements for interface expansion
3. Price-sensitive consumers
Mechanical Revolution Jiaolong15ProIt can be regarded as an upgraded version of Jiaolong15K,Higher screen specifications,More scientific memory,A-side upgrade metal,It's also a little thinner than Jiaolong15K,The point is that the price is only 50 yuan more expensive,The cost performance is at its peak。 In terms of screen, the measured color gamut volume is 103.0%sRGB, and the color gamut covers 96.4%sRGB. Taking sRGB as a reference, the average ΔE is 2.28, the maximum ΔE is 5.09, and the measured maximum brightness is 349nits.
In terms of interfaces, the left side of the fuselage is USB-A 2.0 and split 3.5mm audio interfaces, and the right side of the fuselage is followed by two USB-A 5Gbps and SD card slots (USB2.0 rate), and the rear side of the fuselage is the power interface, RJ45 network port, HDMI2.1 (independent display output), USB-C 10Gbps (only supports data transmission), and MiniDP1.4 interface (independent display output).
In terms of noise, it has a decibel level of 55.3dB at full load. (33.6dB ambient noise)
In terms of battery life, the PCmark10 endurance test score is 4 hours and 19 minutes. (Scene: Modern Office)
Since this machine does not have a core display, this battery life test is tested in the state of direct connection of the independent display.
Mechanical Revolution Jiaolong 15Pro is only available on PDD, the front desk price is 5199 yuan, and it can be reduced to 5049 yuan by receiving a 150 yuan coupon for new customers in the store. So if you want a RTX4060 gaming laptop that is very cost-effective, then this notebook can be considered.
But if you have higher requirements for battery life and keyboard temperature, then this computer is not for you.
【Heat Analysis】
The picture above is a real picture of the disassembly of the mechanical revolution Jiaolong 15Pro, a combination of five heat pipes and two fans.
Room temperature 25 °C
Reflectance1.0
BIOS版本：N.1.23MRO20
In the full load state, the maximum CPU temperature is 98.9°C, stable at 98.0°C, the power consumption is 43W, the frequency is 3.5GHz, and the graphics card temperature is 84.6°C, the power consumption is 140W, and the frequency is 2175MHz.
单烤Stress FPU，CPU温度维持在99.1℃，功耗69W，频率4.1GHz。
Single-bake Furmark, the temperature of the graphics card is maintained at 81.2°C, the power consumption is 140W, and the frequency is 2280MHz.
The surface temperature is shown in the graph above, with keyboard keycaps up to 50.3°C on the "T" key, around 40.6°C near the WASD key, and 31.7°C on the arrow key. The temperature of the left wrist rest is 27.8°C.
In general, the mechanical revolution Jiaolong 15Pro's heat dissipation performance is decent, and the keyboard temperature has been "teppanyaki".
The CPU is also very hot, but the total power consumption of the dual cores at full load is 183W, and the noise is not outrageous, so the experience of using an external keyboard will be better.
【The Pig King's Conscience Conclusion】
I finally understand what the brand name of "Mechanical Revolution" means, they not only want to change the lives of other brands, but even their own lives, the left hand hits the right hand, and the other second-tier brands tremble.
But in fact, Jiaolong15ProThere are still some details to be discussed,For example, the screen has been upgraded from1080P to2.5K resolution,It seems to have been upgraded,In fact, the brightness has dropped from the original measurement429nitsto349nits,This is difficult for computer novices to find。
In addition, the hard disk of the machine in this evaluation uses long-term storage PC411, and the last time it was PC300, the specifications must have been improved, but I am not sure whether the supply of hard disks will be stable in the future, so I didn't mention the hard disk at the beginning.
In fact, all of the above belong to me and I have nothing to do.,5059 yuan price,I won't say anything even if I use low color gamut+QLC last year.,Now I'm completely satisfied with this kind of machine~