We work with the ground every day, from the living room of our home, to the office building, or the hallway of the school, to the plaza and parking lot in the public space. But have you ever thought that these seemingly ordinary concrete floors actually have a lot of "stories"?
Imagine that a newly paved floor is smooth and smooth, but as time goes by, there will be problems such as dust, dust, sand, and falling off, and the aesthetics and durability of the ground will be greatly reduced.
At this time, the BANDĚ Bondime ® crystal floor liquid hardener, which can be called the "patron saint of the floor", comes in handy~ Let's find out together, how does it work?
Product Introduction
After being in contact with the surface of the floor, the liquid hardener of BANDě ® crystal floor can change the surface strength of the floor after full penetration, and at the same time, it can effectively solve the problems of ash, dust, sand, and shedding.
8 characteristics of Bondmate hardener to repair concrete floors:
Impermeability: sealing, dustproof, improve impermeability;
Improve hardness and wear resistance: It can penetrate into the cement-based surface, react quickly with ions in the concrete, and build a three-dimensional network structure in the multi-dimensional space, improve the hardness of the concrete surface and enhance the wear resistance;
Inorganic water-based materials: water-based materials, colorless, odorless, non-combustible;
Anti-ash and sanding: effectively solve the phenomenon of ash and sanding;
Bright: After using it, the brighter it becomes, and the brighter it gets;
With the blessing of the "Ground Guardian", there is no need to worry about the floor dusting, dusting, sanding, falling off and other problems, even if it is used for a long time, the floor can still maintain a smooth and smooth appearance.
Moreover, BANDě Bondime ® Crystal Floor Liquid Hardener is a water-based inorganic material, which fully meets the needs of today's society for environment, health and safety, and will not cause any pollution to the surrounding environment, which will be more safe to use!
Procedure
BANDě Bangdimei ® crystal flooring not only has a short construction period, but also relatively simple construction steps;
First clean the surface of the floor with tap water as a whole until there is no fine gravel, and then use the grinding disc to polish vertically and horizontally 2-3 times to remove the dust and slurry on the surface of the floor.
Pour the liquid hardener of the BANDě ® crystal floor on the ground, apply it evenly with a plastic broom, let the material fully penetrate, keep the material soaked on the surface of the floor for 40-60 minutes, you can leave after 2 hours, you can open to traffic after a week, if you need to see the bright effect of the floor as soon as possible, you can also carry out professional polishing treatment;
It should be noted here that the floor construction is not allowed to soak in water for a week.
Comparison of results
Now that we understand the construction steps, let's take a look at some actual cases~
Like the more common factory workshops, underground garages, supermarkets, or office buildings, exhibition halls, gas stations, as well as airports, subways, schools, hospitals, restaurants, clubs, etc., when encountering problems such as ash, dust, sand, and falling off, you can choose to use BANDě Bondime ® crystal floor liquid hardener to effectively solve the floor problem and significantly improve the wear resistance of the ground.
Through the actual case, we can see that BANDě Bondi ® crystal floor liquid hardener has a wide range of applications in daily life and industrial production, which can not only help us solve the floor problem, but also improve the durability of the floor;
If you just need it, try BANDĚ ® Crystal Floor Liquid Hardener to make it a stronger and safer addition to your flooring!