In today's increasingly advanced hardware configuration, how to choose a case that can not only meet the performance needs, but also provide excellent heat dissipation has always been the focus of many gamers. THE MSI MPG GUNGNIR 300R AIRFLOW CASE HAS BECOME A STAR PRODUCT IN THE MARKET WITH ITS UNIQUE DESIGN AND EXCELLENT PERFORMANCE. This article will take an in-depth look at this case and give you a taste of its charm.
Exterior design: the perfect blend of fashion and personalization
The overall dimensions of the MSI MPG GUNGNIR 300R Airflow chassis are 505mm×235mm×510mm, which belongs to the mid-tower size. Its appearance design is atmospheric and delicate, with smooth lines and unique shape. Dual 360 radiators are installed on the top and front, which greatly enhances heat dissipation. At the same time, it is equipped with air vents on the top and front to support front and overhead fans, effectively improving heat dissipation efficiency.
A good chassis must not only have excellent thermal performance, but also provide enough headroom for expansion to cope with the ever-increasing hardware demands. THE MSI MPG GUNGNIR 300R AIRFLOW CASE, WITH ITS UNIQUE DESIGN AND EXCELLENT PERFORMANCE, MANAGED TO ATTRACT MY ATTENTION. The appearance is atmospheric and delicate. It supports the installation of dual 360 radiators on the top and front, which greatly enhances the heat dissipation performance.
In addition to various specifications of screws, the MSI Krypton Gold Gun 3 chassis also comes with an L-shaped double-ended Phillips screwdriver, in addition to an integral bezel to replace, unfortunately there is no additional fan shipped, and the quick installation manual does not have instructions for the use of the graphics card bracket, so you can only figure it out yourself.
Internals: Extensibility and compatibility
Open the lid of the case, and we can see that its internal structure is just as good. The MSI MPG GUNGNIR 300R Airflow chassis supports EATX motherboards up to 280*305mm, and is compatible with standard ATX, MATX, and ITX motherboards. This wide range of compatibility allows this case to meet the needs of different users. In addition, it supports up to 6 2.5-inch drive bays and 2 2.5/3.5 drive cages, making the drive expandable.
The front IO of the case is also on the top, with a pair of USB3.1 TYPE-A, a USB3.1 TYPE-C, a pair of 3.5 audio ports, an RGB lighting button, a Reset, and a large square Power key with a white LED light ring.
It has a wind tunnel roof with a magnetic dust filter and supports up to 360 radiators, as well as extra-wide radiators of 280 sizes.
Secondly, on the bottom surface, the entire bottom surface of the Krypton Gold Gun 3 has no air ducts, only a wind tunnel is left in the power supply position, and it is also equipped with a drawer-type dust filter.
THE DISTINCTIVE FEATURE OF THE MSI MPG GUNGNIR 300R AIRFLOW CASE IS UNDOUBTEDLY ITS POWERFUL COOLING PERFORMANCE. The 360 radiator mounting on the top and front gives this case a significant advantage in terms of heat dissipation. In actual use, the temperature inside the chassis can be kept at a relatively low level even when operating under high loads, which greatly improves the performance life of the hardware.
The back of the Krypton Gun 3 has an ARGB-PWM control board, and the panel also adds a lot of color to this case. Through this panel, users can flexibly control the lighting effects inside the case, adding a touch of cool atmosphere to the entire computer system. At the same time, its slide-rail HDD compartment and tool-free disassembly design also greatly improve the user's convenience.
The scientific layout of the four SATA SSD hard disk racks does not interfere with each other, and the screw-free installation is more worry-free.
Although there is no air duct design on the bottom surface as a whole, only a wind tunnel is left in the power supply position, but it is equipped with a drawer-type dust net. These details fully reflect MSI's dedication to products and the importance of user experience.
IOThe wire used is very thick,So you need to use the wire duct to manage the wire,Krypton gold gun3The wire duct also has a curve mouth,It's very surprising;The front control interface in the front wiring is integrated into one,USB2.0The interface is canceled,Krypton gold gun3The surprise continues;The four corners of the bottom power supply are pasted with shock-absorbing rubber pads,The details of the processing are surprising。
In terms of graphics card support, this case can support graphics cards up to 360mm in length, and if you install a fan on the front, it can support 340mm in length, and the graphics card compatibility is quite good. The processor supports up to 175mm of air cooling, while the water cooling is compatible with a dual-fan hamburger-style 360 radiator. Finally, the entire chassis can be fitted with up to 9 x 120mm, 2 x 60mm, and 1 x 80mm fan, which is theoretically quite efficient in terms of heat dissipation.
The biggest and most intuitive feature of Krypton 3 is the ARGB graphics card bracket that can be called a conspicuous package, its main body is made of tempered glass and metal, the tempered glass is printed with the iconic dragon motif, and the built-in ARGB atmosphere light. In addition to freely adjusting the height on the Z-axis like similar products, this graphics card bracket can also adjust the depth of the X-axis and Y-axis in different gears, fully adapting to various specifications of long graphics cards.
The perfect combination of heat dissipation and light efficiency
THE DISTINCTIVE FEATURE OF THE MSI MPG GUNGNIR 300R AIRFLOW CASE IS UNDOUBTEDLY ITS POWERFUL COOLING PERFORMANCE. The 360 radiator mounting on the top and front gives this case a significant advantage in terms of heat dissipation. In actual use, the temperature inside the chassis can be kept at a relatively low level even when operating under high loads, which greatly improves the performance life of the hardware.
The replacement of the double bezel is to loosen the thumb screw and the notch is down, and it adopts a design with a fastening mouth. The heat dissipation performance of the Krypton Gold Gun 3 chassis is excellent. There are vents on the front panel and top to support both front and top fans, and if you replace the replacement PCI baffle, you will definitely have more heat dissipation if you install two small 60mm fans.
In this configuration, the i7-14700KF core is paired with an MPG Z790 EDGE Ti MAX WIFI motherboard and MAG COREQUILD M360 mortar cooler, as well as an MSI Geforce RTX4070Ti GAMINGX TRIO 12GB magic dragon graphics card.
Summary Evaluation: The best choice for high-end gaming cases
OVERALL, THE MSI MPG GUNGNIR 300R AIRFLOW CASE IS A VERY GOOD HIGH-END GAMING CASE. Its strong heat dissipation performance, wide compatibility and elegant design make it stand out from the rest. Although the price is relatively high, it is undoubtedly a very worthwhile option for gamers who are looking for quality and performance.