Hello everyone, I'm Long'er, don't panic if the toilet in the house is blocked, you can easily dredge it with a roll of scotch tape, it doesn't cost a penny, it saves money and is practical, and the method is very simple.
The toilet is available in every household, whether it is squatting or sitting, it is easy to be blocked, many times it will affect our normal life after a blockage, so we will choose to ask the master to dredge it at home, every time it is dredged, hundreds of oceans are gone, and it hurts to touch the purse.
Especially for a housewife like me, I usually don't have a dime income, so I can't afford to spend so much money at one time.
Normally, I would choose to use scotch tape at home to solve this problem.
Before using the tape, we first wipe the edge of the toilet bowl with a paper towel, mainly to wipe some dirty things on it, as well as stains and water stains, so that we can operate more effectively.
Why is the toilet prone to clogging? Sometimes people in the family throw paper towels in the toilet after use, or pour some leftover soup directly into the toilet bowl to flush away, so that it is particularly easy to clog.
Therefore, we must usually prevent some things from being thrown into the toilet bowl to avoid more serious consequences.
Once the toilet is wiped clean, it's time to use plastic tape, which I always stock up on at home in case I need it.
Choose a random one you like, tear the transparent glue open, and connect the innermost position of the toilet bowl, so that the toilet bowl is pasted.
Make sure that this part of our scotch tape is completely attached to the outside of the toilet bowl to ensure that no air can enter the inside of the toilet.
Next, repeat this action directly, stick the tape on the toilet bowl one by one, and stick this side of the tape on the other side of the tape, so that they coincide together, so that there will be no gaps between the two tapes.
So when we do this step, the wider the tape, the more convenient it will be. Until the whole toilet is completely sealed, after all the seals are completed, we have to check whether the toilet is completely sealed, if the toilet is not completely sealed, there are gaps on the surface, and there is air to enter it, it will not play the role of unclogging the toilet.
After the inspection, now we press the flush button, when the toilet flushes, because the toilet is now in a particularly confined space, it will generate a huge air pressure, and this air pressure will form a huge pressure at the sewer pipe of the toilet, and this pressure will take away the blockage in the toilet, flush away, flush the water several times, and our toilet will be dredged.
This method is very simple, the principle is also very simple, if our toilet is not particularly seriously blocked, you can easily dredge the toilet with this method, and it does not cost a penny.
It's also extremely easy to operate, and anyone can do it. If you use this method several times and your toilet is not particularly smooth, then it means that the blockage is more serious. We need to go one step further and take the scotch tape off and throw it away.
Now we need to prepare some plastic bottles, like this kind of plastic bottles I believe that there are many in every household, there are water after drinking, there are all kinds of drinks after drinking, we can use it, but we must make sure that it must be plastic bottles. Like a glass bottle, you can't use it, just find a plastic bottle that you think is more beautiful and beautiful.
After choosing, remove the label on it, and then use scissors to cut the bottom of the bottle, pay attention to cut the cut edge a little flat, so that it will be more convenient to use and the effect is better. Normally, after cutting, I also use a lighter to bake the edges of the cut to make it smoother and fit tighter.
This method of its practical plastic bottle has also been shared with you in the previous video, but I believe that many friends have seen it, and many friends still don't know, so I will share it with you again.
When baking with a lighter, make sure that every place is baked and do not stay in one place for too long, otherwise the bottle will be roasted.
Next, we poke a small hole in the bottle cap, you can use the electric soldering iron in the house, or you can use scissors, poke it in and turn it slightly, so that the opening on the bottle cap can be larger, and after poking, the bottle cap will be unscrewed off, and then the chopsticks are thicker This end is inserted into the bottle cap, which has edges and corners, and can be fixed more steadily.
Then use hot melt glue to beat a little around the opening, so that the lid and chopsticks can be better fit together, and there will be no ventilation.
We first make a circle from the inside of the lid, and then make a circle around the outside of the lid, which mainly plays a role of fixing and sealing, and it will be particularly strong in this way.
We are not in a hurry to use it after it has just been beaten, and now we use the electric fan or fan in the house to blow it to let the hot melt adhesive on it dry completely.
It takes more than 40 seconds for the whole process to be completely fixed, and now we screw the bottle on the cap. So we have one of these bottles, and now we can put it to use.
We will align the mouth of the bottle with the mouth of the toilet drain pipe, do not rush back and forth before aligning, at this time open the flush button, let the toilet store some water, can increase a part of the pressure, so that it is easier to dredge.
After the water is stored, we can now start pumping the mineral water bottle inside, which at this time serves as a pigeon with a hollow state in the center.
When we keep pumping back and forth, there will be a huge pressure inside, this pressure is greater than the pressure we just used with transparent glue, in the process of our continuous pumping, you can dredge the toilet pipes very well, at this time press the pumping button, you can see that the toilet has been completely dredged, and the water flow is particularly smooth. Soup, isn't that a great way to do it?
After the toilet is dredged, we can't use it immediately, we have to use the alcohol in the home to spray it on the inner wall of the toilet, because after the toilet is blocked, it will be filled with a lot of waste water and some bacteria, and it is not very safe to use it directly.
So we must first spray it with alcohol everywhere, disinfect and sterilize it, and then sprinkle some salt in, salt also has a good disinfection and sterilization effect, sprinkle a little along the inner wall of the toilet, because it is sprayed with alcohol, at this time the sprinkled salt can be well attached to the inner wall of the toilet, after sprinkling, now cover the toilet lid and let it keep for ten minutes.
After ten minutes, we use the toilet brush in the home to brush along the inner wall of the toilet, and we can clean some stains, dirt and bacteria on the inner wall of the toilet.
After all the brushing, now flush the toilet according to the flush, this time the toilet is very close to new, for the sake of insurance, I will spray alcohol again, so that the toilet can now be used very safely.
If you have the same troubles, try the method shared with you today!
If you like my video, remember to like and follow and collect, then this issue of video sharing is here, let's see you in the next video, bye-bye.