1. How to switch the win mode?
Press and hold FN2+W
2. Where is FN2?
3. Where is the web page driver address?
How the firmware is used
Unzip the firmware package and find the exe file as shown in the figure
After clicking, the interface as shown in the image will be displayed
Click Start update as shown in the image to start the firmware upgrade
As shown in the figure, the firmware upgrade was successful
The firmware upgrade is successful
Note Do not click on the BooTriger .exe
Fourth, the web drive cannot be opened?
1 Check if the browser is
or
2 Use a ladder
(3) Reset DNS
5. Why can't I link it?
1. Check whether it is WIN mode?
1.1 is already in win mode ➡ (2)
1.2 No After ➡ switching to Win mode(2)
2. Confirm whether to update the firmware
2.1 Updated firmware
2.2 Firmware not updated Group file download firmware upgrade
3. Check if the browser is
or
3.1 Yes Discover devices after opening a web page to see if it is
Click Connect your kerboard in the middle and the web page will pop up the image below for the correct link
3.1.1 No download restore package After restoring the firmware, upgrade the new firmware
3.1.2Yes Congratulations on getting started with Web Drive
3.2 No Change browser to the specified browser
3.3 If it is one of the specified browsers, for example, using the EDGE browser to enter the web driver, click Connect your kerboard and there is no response, then switch to Chrome browser to try, the same is true for Chorme
6. The firmware upgrade failed
Check if it is WIN mode: Turn 1 and 2
Download the restore package Restore the firmware and upgrade the new firmware
7. Why is the keyboard light gone?
The light fails after the speed mode is turned on
You need the light to turn off the speed mode, go to the light to your liking, and then turn on the speed mode
After the RC firmware update, the speed mode is turned on, and the white light in the center of the keyboard forms the letters, and the KO style prompt is now the speed mode
The KO lamp is not adjustable and cannot be turned off
Press FN2+T to switch to normal mode, and the normal mode light is adjustable
22/10/15 RC3 firmware update
After the RC3 firmware update, the speed mode is turned on, and the keyboard full keys are bright red and white solid light to indicate that the speed mode is currently the speed mode.
Press FN2+T to switch to normal mode, and the normal mode light is adjustable
To turn off the Extreme Mode lights completely, press FN2+ ⬇ to manually turn off the lights
Press FN2+ ⬆ to manually adjust the light brightness when needed
8. The best settings for tiles
Trigger point setting 0.2 Press 0.1 Raise 0.1
Then change the parameters yourself according to the actual usage experience
9. After the web driver is set up, do I need to re-flash the firmware if I want to change the settings?
No
10. Do I need to re-flash the firmware and reset the setting when changing the computer?
Onboard
11. Speed mode Is the fast trigger mode and key tracking enabled?
To turn on, enable key tracking without opening
12. Does Speed Mode improve the game?
Reduce latency
13. Can I return the webpage after saving the webpage?
The onboard one is turned off
14. What are these two on the picture?
It's RT