I. Introduction
The overall design of Antic's DF series chassis is still quite good, the duct design is very creative, and the overall heat dissipation of the chassis is very good, so it is very popular with consumers.
Antic is also continuing to push forward, launching more DF series chassis, DF800 Flux is one of them, but this chassis is still very different from other chassis. It is to ensure the air intake effect in the front of the chassis at the same time, but also to make the front of the chassis more designed.
At the same time as the appearance value is improved, many advantages of the Antik DF series chassis have been retained, and the details are handled to the end.
Second, anthem dynamite Obsidian DF800 Flux tower chassis unboxed
▼ The packaging of the chassis is still very familiar, the front is printed with the appearance of the chassis, the lower left corner is the model, and the right side has the LOGO of Antic.
▼The side of the chassis is the model, and the detailed information, size, and parameters of the organic box.
▼ In addition, there is an explosion diagram of the chassis on the back of the carton, which details the internal structure design of the chassis.
▼ The inside of the carton is an accessory box in addition to the chassis.
Third, the appearance of the Antigram Obsidian DF800 Flux tower chassis
▼ The appearance of the chassis is still very beautiful, the whole is black, there is a large area of side through glass on the side, and the side through glass is also blackened.
▼ The design of the front part of the chassis is very novel, both appearance and functionality.
▼ The left part is a metal punching mesh, various Mitsubishi structures, and the overall effect is very good on different planes. On the right is a mirror structure with an ANTIC LOGO in the middle and a mirror ARGB light effect design inside.
▼ On the back of the chassis, a whole metal plate has a style grille at the bottom.
▼ The back of the chassis, the common design of the tower chassis, the bottom is the power supply compartment, the middle is the PCIe bezel, and the upper part is the IO opening of the motherboard and the rear fan position.
▼The upper part of the chassis has an elevated design to facilitate the installation of water cooling on the top of the chassis.
▼ The structure design inside the chassis is also very simple, a complete piece of space.
▼The side of the chassis is through glass, and the side is wrapped in foam and metal material, which completely protects the side side glass.
▼ The motherboard of the chassis is fixed on the left side, and there are openings around it to facilitate wiring.
▼ The right part has a hard disk fixed bit, and the front part of the chassis has a 360 water cooling drain and a chassis fan fixed bit.
▼ The bottom is an independent power supply compartment, the top of the power supply compartment organic box fan fixed position, the side of the side of the design, you can show the side of the power supply.
▼ The back of the chassis, the overall look is quite good.
▼ On the right side are two 2.5-inch hard disk fixed bits, which are designed for quick disassembly.
▼ The bottom is a separate power supply compartment, and the left side is a fixed bit of the hard disk.
▼ The hardware of the chassis is good, a simple measurement, the thickness is about 0.85mm, and the overall touch of the chassis is very tough.
Fourth, anthemic Obsidian DF800 Flux tower chassis installed
▼ The installation of the chassis is still quite simple, here is a set of 5600X with MSI X570S EDGE MAX Wifi motherboard set of configuration, water cooling is the overclocking three of the Mirror 240 water cooling.
▼ Here it is easily fixed to the inside of the chassis, and the water cooling drain is fixed to the upper part of the chassis.
▼ By the way, this DF800 Flux chassis of Antec comes standard with five chassis fans, four of which support ARGB lighting effects, and when you first want to install something else, you will take it down, and then install it back here.
▼ Antec standard controller is still very easy to use, this is a six-digit fan HUB and lighting effect HUB, and support fan speed regulation, light effect synchronization, very easy to use.
▼ The power supply is MSI's MPG A850GF power supply, which has gold certification, all-Japan capacitors, and a ten-year warranty, making it easy to use every day.
▼ The fan grille on the side of the power supply is silver gray, the grille hole is round and beautiful, and there is a MSI LOGO in the middle.
▼After the power supply is fixed, the power supply of each part is connected by hand.
▼ Then install the graphics card, Yingchi's RTX3070Ti HOF Pro, the fan cover of the graphics card is pure white, and the cooling fan is also pure white, which is very beautiful.
▼Here it is normally installed horizontally inside the chassis, and the words HOF OF GAME are on the side of the graphics card.
▼ MSI's MPG A850GF power supply details are handled well, the graphics card's 8Pin auxiliary power plug is designed for single 8Pin, and the single line load is lower and more stable in the case of high load on the graphics card.
▼ Boot, light up at once, the whole machine effect is still very beautiful.
▼ There are two chassis fan positions above the chassis power supply compartment, where two chassis fans can be fixed to directly take care of the heat dissipation of the graphics card. In addition, antick's DF800 Flux standard with ARGB lighting effects of the fan lighting design is still very interesting, the front and back have milky white RGB light strips, formal, upside down can be seen.
▼ The effect of the front part of the chassis is also very beautiful, the left side is a metal punching mesh, and the right side is a mirror decoration.
▼Look closely, the surface of the metal punching mesh has a Mitsubishi-shaped stamping treatment, and the overall texture is very beautiful.
▼ The decorative part on the right side of the chassis is also triangular, with an antec logo in the middle and a mirror ARGB light strip around it, which looks very beautiful.
▼ The whole machine effect is still very beautiful, especially the front of the chassis.
▼ Looking at the other hardware inside the chassis, the motherboard is MSI's X570S EDGE MAX Wifi motherboard, and the left power supply and upper side power supply circuit parts of the motherboard are covered with metal heat sinks to ensure heat dissipation and stable operation.
▼This motherboard has 3 M2 slots and is covered with metal heatsinks. In addition, in the south bridge part of the motherboard, the familiar small fan is gone, directly a whole piece of metal heat dissipation, praise! After the fan is cancelled in this way, the standby time will be quieter.
▼ Water cooling is the overclocking three of the Ling mirror 240 water cooling, the top of the water cooling head has a large area of light effect design, the color is uniform, the effect is very good.
▼ Look closely, the overall texture is very good.
▼ The memory is Zadak's SPARK, the top of the memory module has a whole RGB light strip, the color transition is uniform, the effect is quite good.
▼ There are many segments of RGB light strips on the side of the memory stick, and the shape like a small wing looks amazing.
▼ The HOF OF GAME on the side of the RTX3070Ti HOF Pro graphics card has a lighting effect and looks pretty good.
▼ The cooling fan in the front middle of the graphics card has ARGB lighting effects, and the vertical installation of this graphics card should also be very good-looking.
Fifth, Antix Obsidian DF800 Flux tower chassis test
▼ The whole machine configuration list, the processor is 5600X, the motherboard is MSI's X570S EDGE MAX Wifi, the graphics card is Yingchi's RTX3070Ti HOF Pro, and the memory is Zadak's SPARK.
▼ Simple run a test, the whole machine score 145W, processor 59W, graphics card 61.2W, the overall performance is still quite good.
▼ The room temperature is about 20 °C, and in standby, the temperature of the processor fluctuates around 34 °C, and the power consumption is about 35W.
▼ Simple run a CPU-Z pressure test, processor power consumption of about 100W, full core turbo frequency 4.6GHz, temperature of about 65 ° C, good heat dissipation effect.
▼ Single-baked FPU test, processor power consumption 120W, full core turbo frequency 4.525GHz, processor temperature fluctuates around 83 ° C, the overall heat dissipation effect is good.
▼ Run the 3Dmark stress test, TS mode, frame rate stability rate of 98.7%.
▼ The core temperature of the graphics card is up to 68.38 °C, and the temperature of the processor is slightly affected by the graphics card, the temperature is slightly higher, fluctuating around 49 °C.
6. Summary
Antic DF800 Flux Star Shine chassis is still very good, under the premise of ensuring chassis heat dissipation and internal air duct of the chassis, the front of the chassis is higher, and the overall effect will be more beautiful. Whether it's the mitsubishi-shaped metal punching mesh or the triangular mirror RGB decoration, it looks very beautiful.
The heat dissipation part, the air intake area of the chassis is also very large, the air intake effect is first-class, and the inside of the chassis will easily be blown in by the wind. In addition, the upper part of the power supply compartment also has an organic chassis fan position, which can take care of the heat dissipation of the graphics card alone.
In terms of configuration, this chassis is equipped with 5 chassis fans as standard, four of which support ARGB lighting effects, and there is also a fan HUB small board, which supports six fans to regulate speed and support six fans to synchronize the lighting effects, which is good.
Thank you!
The End