At present, in addition to the most mainstream sea view room case, this year's small case is also very popular, after all, compared with the standard mid-tower case, the small case is more advantageous in size, and the rich gameplay is also full of DIY fun. So on the occasion of 618, Xianma released Fun Air and Fun Made2Air, they belong to the same positioning as the youth version, the starting prices are 139 and 199 respectively, and the cost performance is quite high. So let's take a look at the specific configuration of these two boxes.
First Ma Qu made Air
First of all, Xianma's Fun Air, the original Fun is believed to be very familiar to many friends, it is a case that can support M-ATX and ITX motherboards. In terms of appearance, Xianma Quzao Air is equipped with heat dissipation holes at each panel, of which the front panel is still a snap-on structure, and the top provides two USB 3.0 and 3.5mm ports for headphones and microphones. As for the dimensions, the Fun Air still maintains the same size of 396mm long, 185mm wide and 303mm high.
In terms of compatibility, Quzao Air can support M-ATX and ITX motherboards, the maximum length of the graphics card is 355mm, the PCI slot is 4+2 with vertical slots, and the heatsink is air cooling with a maximum of 155mm and water cooling with 240 installed at the bottom. Because the SFX bracket has been canceled by Fun Air, only ATX specifications can be installed in the power supply, and there is one less mounting position in the hard disk, so if you want to expand the hard disk, you can use the bottom two SSDs or HDDs and the front two SSDs.
In terms of fan positions,QuzaoAir has canceled the fan rack on the left side,There are two less fan positions,There are two top 12cm、Two bottom12cm and one rear8cm,The whole is still very sufficient。 In addition, Fun Air has given 5 dust filters, but the number is more than the original, and it will be more worry-free for daily use.
Xianma Fun made 2 Air
Then there's the fun made2 AirThis case,It's also a case that can support M-ATX、ITX and back-plugged motherboards,From the point of view of appearance, the whole of the fun made2Air is basically the same as the fun made2,Its four panels are transparent heat dissipation holes,The disassembly method is also a quick release structure,The placement method can be selected as formal and upside down,Convenience and playability are enough。 The chassis I/O ports are still here at the front, with two USB 3.0, a Type-C, and a 2-in-1 3.5mm port on top. In terms of dimensions, the Quzao 2Air is 391mm long, 205mm wide and 325mm high, and the size remains the same.
In terms of compatibility, in addition to supporting M-ATX, ITX and back-plug motherboards, it can also support graphics cards up to 355mm and 166mm air-cooled installation, and the power supply can support ATX and SFX specifications, and the power cover version has also been canceled. Since Air does not have an expansion compartment by default, it cannot be installed with water cooling when it does not install an expansion compartment, and the hard disk bay is also missing two positions, if you want to expand, there are three hard disk bays at the top and bottom that can be installed with SSD or HDD.
In terms of fan position, Quzao 2Air has not been reduced, it can support a 12cm in the front, 3 12cm in the top and bottom or 2 14cm in the back, and a 12cm fan installation in the rear, the heat dissipation capacity is very sufficient, and there is basically no need to worry about overheating with the heat dissipation holes of the whole machine.
In general,Whether it's Fun Air or Fun 2Air,They all retain the core gameplay and compatibility of the original chassis,When you install it, you can deal with various hardware platforms well,The playability is high enough,And the most important thing is,These two cases have a very attractive price during the 618 period,What else do you want a bicycle,You can start with the installation demand in the near future!