Antenna system function and operation video
Video catalog introduction
00:18 Antenna board introduction
MIPRO's various antenna boards and product interfaces are introduced
01:28 Antenna Splitter Introduction
Panel display, buttons, interface descriptions, and general usage in wireless systems for dispensers.
02:38 Coaxial cable
Antenna system cable selection and considerations when purchasing cables.
Product introduction
Since the wireless microphone system is transmitted and received by the antenna in practical application, the design and correct installation of the antenna system are the key to improving the signal transmission quality and transmission distance.
Product specifications
Model: AT-80a
Type: External extension antenna
Frequency band: UHF 470 ~ 1000 MHz
Antenna gain: 4 to 6 dBi
Built-in strong wavemaker: Built-in 0 ~ 12 dB continuously adjustable gain strong waver
Antenna impedance: 50Ω
Connection socket: TNC female ×2
Power supply: RX connectors must provide a bias supply of 8 to 15 V DC
Dimensions: 319×270×25 mm
Weight: approx. 430 g
Remarks: If there is an error in each specification, it is based on the actual product.
Model: AT-90W
Frequency range: 470~1000MHz
Antenna gain: 4 to 6 dBi
Amplifier gain: 12±1 dB (RX connector), 0 dB (TX/RX connector)
VSWR: ≦ 2:1 (RX connector), ≦ 2:1 (TX/RX connector)
3-dB beam width: 75° vertical, 130° horizontal
Power consumption: RX connector: 1120 mW (DC 8V, new DC 8~15V) TX/RX connector: 0 mW
System impedance: 50Ω
Connector: TNC female ×2
Dimensions(mm): 319(W) × 270(H) × 25(D)
Weight (g): approx. 430
Remarks: If there is any error in each specification, it is based on the actual product.
Model: AT-100
Antenna gain: 6 to 8 dBi
Power supply: RX connectors must provide a bias supply of 8 to 15 V
Features: The vertical or horizontal plane in front of the DC antenna shows a uniform radiation field type, reducing the antenna polarization loss
Dimensions (W× H×D): 350×350×225 mm
Weight: approx. 1.5 kg
Model: AT-70W
Frequency range: 470 to 1000 MHz
Antenna gain: 2 to 4 dBi
Amplifier gain: 12±1 dB (RX socket), 0 dB (TX/RX socket)
VSWR: ≦ 2:1 (RX socket), ≦ 2:1 (TX/RX socket)
Power consumption: RX connector: 1120 mW (DC 8V, new DC 8~15V) TX/RX connector: 0 mW
Dimensions(mm):120(W)×261(H)×32(D)
Weight (g): approx. 200
Model: AD-80a
Antenna distribution: two groups of active one-to-four distribution outputs and two groups of active one-to-one distribution outputs
Applicable frequency band range: 470~850MHz
Input truncation point: +32dBm
Cable Loss Detection Function: Automatically detects cable loss to control the gain of mpb-30
RF output gain: +1.0dB±1dB
Output/input gain: +1.0dB±1dB
Output isolation: > 18dB at 400~1000MHz
Frequency band selectivity: low-end ≧ 35dB, high-end ≧30dB
Output/input impedance: 50Ω
Antenna output connector: TNC socket
Antenna input connector: Antenna A and B inputs provide 8.3V DC each,
Power supplies: 230 mA max
Power supply: 12~15V DC
Current consumption: Approx. 242mA/12V DC Input
Dimensions(mm): 420(W) × 44(H) × 180(D)
Weight (kg): approx. 1.5
Model: AD-708
Applicable frequency bandwidth range: 470~850MHz
Antenna input connector electrical: antenna A, B input each provides 8.3 V DC,
Source: 230 mAmax. Power supply to the strong wavemaker
Current consumption: Approximately 190mA at 12V DC input
Dimensions(mm): 482(W) × 44(H) × 190(D)
Weight (kg): Weighs about 1.5
Remarks: If there is any error in each specification, it is based on the actual product