When you need to turn or make a U-turn at an intersection, how many steps are there in general?
Isn't that just going to hit the steering wheel?
Is this the answer of most of the friends?
NONONO!
Do not observe the road conditions at the intersection,
Just turn around or turn,
The consequences will be like the following case!
At the intersection, I want to make a U-turn
Complete disregard for whether there are vehicles driving behind
Such behavior is really harmful to others and to oneself
At the time of the incident
In front of the electric car there is a large truck preparing to turn
The driver of the electric car bypasses the front of the large truck
Turn directly
It happened that at this time there was a small car on the left going straight
Accidents are on the verge of breaking out
I put on the turn signals in advance and there would be no accidents!
Does this really avoid accidents?
Take a look at the following example and you will know!
You can't use "I hit the turn signals" as an excuse
The violin observes the road conditions
It is a necessary condition for turning
First hit the turn signal in advance, turn your head to see, it's always okay, right?
The purpose of turning your head in advance to look at it is
Observe the road conditions carefully
Ensure safe turning
Otherwise, it is easy to cause accidents
The driver who caused the accident before making a U-turn
There is a noticeable deceleration plus turning the head to see the movement of the vehicle behind
But she didn't take a good look at the road
As a result, four vehicles were damaged in succession
After reading so many accident cases,
So, how do you change lanes correctly?
The following small series will explain the system for everyone!
Changing lanes requires this
The four-step course of lane change: sweeping inside, lighting, glancing out, and accelerating
1
Sweep inside
As the saying goes, it's often the rear car that determines what you do next! Lane change is a good example, if you scan the inner rearview mirror and find that the rear traffic is dense and it is not suitable to change lanes, you will definitely give up. So when you start thinking about changing lanes, you should increase the frequency of scanning the rearview mirror to be aware of the situation in the rear.
2
Lights up
You must turn on the lights before changing lanes, driving is a process of cooperation with other vehicles, if the surrounding vehicles do not know your intentions, it is easy to scratch, let others know your intentions and find that you are the beginning of safe driving!
3
Glance out
The outside is the outside of the rearview mirror, we take the right lane change as an example, after the light is finished, you should glance at the right rearview mirror to find the timing of the lane change. At this point, pay attention to the blind spot of the right rearview mirror. How to eliminate blind spots? Quite simply, accelerate, and the blind spot vehicle in the original rearview mirror will be far away from the blind spot! Remember not to turn your head to look, turn your head to see the blind spot is easy to deviate!
4
hasten
There are no vehicles in the blind area, find the opportunity to change lanes, change lanes decisively, remember, lane changes are a process of accelerating forward to the right! Only in this way can the body move less, and the steering wheel moves less!
These places cannot be diverted
In addition to the correct "posture" of lane change, it is also crucial to remember where lanes can be changed and where not. The following Shu Huang takes you to review the markings that cannot be arbitrarily changed lanes and pressed!
01 Solid white line
Solid white lines are used to distinguish different lanes in the same direction, the white solid lines at intersections are equivalent to isolation guardrails, and vehicle crossings, compaction lines, and turns are illegal.
02 White dashed solid line
The dashed lane of the center white dotted solid line can enter the lane on the solid side of the line, but not from the lane on the side of the solid line to the lane on the dotted side.
03 Single yellow solid line
The single yellow solid line is to prohibit both sides from crossing or pressing the line towards the vehicle. It is generally applied to sections of roads with only one lane or one lane or a motorized lane and a non-motorized road in one direction, and where there are other dangers that require the prohibition of overtaking. No pressure!
04 Double yellow solid line
The double yellow solid line, like the single yellow solid line, is also to prohibit vehicles from crossing or pressing the line on both sides. It is generally drawn on a road with two or more motor vehicle lanes in one direction and no solid central divider. No pressure!
05 Forbidden gridlines
Yellow gridlines, which indicate areas where parking for any reason is prohibited, are drawn as needed on intersections, entrances and exits, and other locations that need to be set up that are prone to traffic jams caused by temporary parking. No matter where the line is drawn, you can't stop, and if you park your car on it, you will face penalties.
06 Diversion line
Diversion lines often appear at intersections, ramps or U-turns, indicating that the vehicle must drive in the corresponding lane according to the diversion line, and must not press or cross the line, let alone stop.
Driving on the road is no joke
Be sure to abide by the law and compare your heart to your heart
Under the premise of ensuring safety, change lanes according to regulations
END
▌Source: Changxing Longnan
▌ Editor: Zhang Yi Review: Wang Zhaolian