Recently, we obtained a set of new FAW-Volkswagen Bora declaration drawings in the Ministry of Industry and Information Technology, the new car adopts a new style of front face design, it has changed a lot, but maintained the same silhouette as the current model. The new FAW-Volkswagen Bora is a mid-term revamped model and is expected to be available within a few months.
The new FAW-Volkswagen Bora adopts a new style of front face, its grille is decorated with three horizontal chrome strips, the outline of the headlights at both ends also looks like some adjustments, and the lighting headlights adopt a matrix style. The lower part of the front face of the new car is very varied, and it features spoon-shaped air deflector slots at both ends, decorated with C-shaped chrome strips. The lower part of the front face of the new car is a trapezoidal lower grille, and the bottom of the car is embellished with through-type chrome strips. The side of the new FAW-Volkswagen Bora body has not changed much, and the new car continues to adopt a family-like body silhouette with a very mediocre shape.
The rear contour of the new FAW-Volkswagen Bora has not been changed, but the details at the bottom have been adjusted, and the middle of the tail of the new car is a very large groove design. The bottom of the new car is decorated with through-type chrome strips, which looks layered.
In terms of the details of the declaration, we can see that the new car has different styles of front and rear bumper decorations, and the new car can choose a matte black B-pillar. In terms of configuration, the new car has an ETC device and a sunroof to choose from. The new FAW-Volkswagen Bora has a length, width and height of 4672/1815/1478mm and a wheelbase of 2688mm, which is slightly longer than the current Bora. In terms of power, the new car will continue to be equipped with a 1.2T engine with a maximum output of 116 horsepower.