Every autumn and winter, there will be a lot of new shoe models on the market, after the exposure of Li Ning's 10 generations of spy photos in the city, everyone is full of interest in this last marshmallow color matching. This Li Ning city 10 generations are about to meet with you, let's first understand the design details of the appearance.
Li Ning is the 10th generation of marshmallows in the city
ABAS009-1
December 25, 2021
899RMB
Silver gray shoe box with eye-catching "TEN" and "" on it
Shoe label on the side of the shoe box
The overall body is made of checked mesh material, and the leather material is added to the sides of the front sole to reinforce
The toe and tongue positions are made of reflective material
The 10 embroidery dots in the toe position represent the 10th generation, and the "L" and "R" are printed on the left and right feet to distinguish them, CST is the abbreviation of Cretivity Shapes Tomorrow
A total of 7 sets of lace holes are used, and various shapes are used according to different forces
The last one with this lace hole is working properly
The towel embroidery at the tongue is the same as that of the 9th generation
Both sides of the shoe are reinforced with hot melt material, lifting lateral support, and the embroidered LINING LOGO is flexible and flowing
The TPU shoe lift at the heel is extremely fast and surrounded by foam for added stability
Large area TPU sidewalls, oval rubber and plastic materials and upturned midsole work together to enhance lateral support
The forefoot is inverted on the inside of the forefoot to stabilize the body
Li Ningyun + palm flick technology dual density midsole
Two-tone rubber outsole, with Wade's handwritten signature on his left heel
Redesigned baseflower, large linear grounding pattern, cross grain center recess, provides more friction when forced
The arch hollow design is cancelled, and the TPU stabilizer is adducted, reducing wear caused by contact with the ground, and the TPU stabilizer is printed with the information on the use of technology: long flick technology
The insole heel cup design provides a better fit, and the large number of lines at the bottom reduces the chance of the insole slipping
The size 42 insole is approximately 276 mm long
The size 42 insole is approximately 91.95 mm wide
The size 42 insole is about 5.09 mm thick
Below, let's compare the difference in the appearance of li ning's 10th generation and the city's 9th generation V1.5, the 9th generation and the 9th generation V1.5 of the whole city are the same in terms of appearance design, hereinafter referred to as the 10th generation and the 9th generation
Li Ning has been in the city for 10 generations
Li Ning city 9 generation V1.5
On the front, the 10th generation (pictured left) inherits a part of the design language of the 9th generation (pictured right), and the lines are more concise and slender
From the side, the 10th generation (picture left) raised forefoot anti-rollover design, the upper and the feet are more fit, the 10th generation (picture left) upper side support is changed to hot melt material, reducing the weight of the shoe body, and the 9th generation (picture right) arch hollow design is eliminated
The 10th generation (picture left) upper height is reduced, completely transformed into a low-top model, Li Ningyun + palm flick technology, built-in double-layer TPU stabilizer
The 9th generation (picture right) upper is in the middle and low-top range, Li Ningyun + forefoot filling type flick technology, PROBAR LOC stabilization device + built-in TPU stabilizer
The 10th generation (picture left) redesigned cross pattern bottom flower, a large number of linear grounding patterns, improve grip
The 10th generation (pictured left) 42-size shoe weighs about 389.3 grams
The 9th generation (pictured right) 42 size single shoe weighs about 437.4 grams
Summary
Although ip is hot and speaks by ability, behind the marshmallow color matching fire is the improvement of product strength, keeping pace with the times and updating product performance in time to obtain more consumer recognition.
Xiaobian upper foot try on, the tongue opening is larger and easy to put on and take off, the size is normal, the width of the sides of the forefoot is moderate, the upper is low, and it is not very friendly to the wide foot and high instep crowd. Fastening the laces, the tongue and heel foam wrapping are comfortable, and there is no obvious root drop. The forefoot outsole is wide, the center of gravity is low, the sense of field is good, the long flick technology forefoot feedback is obvious, and the hind paw is weak.
The specific internal structure also please continue to pay attention to the follow-up push of fast transmission sports.