In the autumn and winter, many students have begun to wear trench coats, and the loose and loose trench coat is tied with a belt, which is thin and British, and also makes the shape more detailed.
However, many girls tie their belts crookedly, and the online video tutorials stare at 10 times and probably can't understand...
So today we don't talk about wearing, let's talk about some practical topics: how to tie a trench coat/coat belt to look good!
We have prepared a detailed version of the picture to share 6 bow tie methods, and students who will not be able to quickly collect it
First, let's talk about the simplest method, the method:
steps:
1. The belt is crossed up and down, and the side with the buckle is slightly shorter in length and placed below;
2. The belt placed on the top bypasses the shorter belt, comes out of it, and makes the first knot;
3. Pull the upper belt down, tie a knot around the lower belt, and pull out the upper belt.
If you feel it, you can also wear it open and put the knot behind your waist:
1. The belt is crossed up and down, and the side with the buckle is underneath;
2. Pull up the side with the clasp, go around the inside of the other side, and then go through the middle circle.
Trench coat with belt buckle, you can buckle the belt loop, wrap around a knot, so that the tail end hangs naturally:
To wear a trench coat with a sweet feeling, you can try a double bow, do not want to look too childish, avoid placing it in the middle:
1. Cross the belt up and down in a "and" shape;
2. Pass the upper belt through the bottommost belt;
3. Fold the belt on the left side;
4. Tie the belt that just went around the bottom and tie the knot around the belt that was just folded;
5. Adjust the shape of the bow.
If you think that the double bow is not good, you can try, it is also a relatively simple and easy-to-use tie, more casual, capable and neat than the double bow, and it is also a kind of tie that European and American girls like very much:
1. Cross the belt up and down in a "and" shape;
2, then the long side from the inside up, after piercing out downward flattening;
3. Fold the belt on the other side to the middle position;
4. Tie the belt that has just been pulled out and tie the knot around the belt that has just been folded;
5. Adjust the shape of the one-sided bow so that the length of the two sides is basically the same.
If you still haven't learned after reading the above, there is a last kind of super simple, that is, casually pull it, keep the belt flat, hang down the line, and also help modify the slenderness of the figure:
Okay ~ The sharing of this issue is over here, leave a message to say that you have learned the first kind?