New house decoration, 80% of the children's room in the home is also 6 ㎡ so large, 6 ㎡ ultra-small children's room, how to create a better future for the child, become a major problem for each family, whether from the child's daily life storage, learning, play, etc. both to reflect the beauty, practicality, promote the growth of children, and maximize the use of space and other aspects are crucial, then how can we create such an environment for children, and then the designer from these aspects to describe the knowledge of children's room decoration.
Today's designers mainly describe it from four aspects, such as the child's growth attributes, how to improve the space, the production of the child's high and low beds, and the secret of the child's space to avoid depression.
The key to the children's room lies in the growth attributes of the child, the child is growing rapidly every day, and the changes in these 9 years can be compared with the tadpole to the frog.
6 years old: Say goodbye to the preschool stage, move from kindergarten to primary school, and develop the ability to adapt and study habits.
8 years old: I made friends with some children of the same age, socialized, played more and more, and even asked children to come to their own homes to play, and began to hide in their own world.
10 years old: Slowly entering puberty, boys are slightly later than girls, and the fourth grade homework is gradually aggravated.
12 years old: This age group goes from primary school to junior high school, and there is pressure to learn.
14-15 years old generally enter the rebellious period of youth, and the body begins to develop twice until it matures.
Designer summary: children grow up with time, appearance, height, personality, clothing size, favorite toys, reading books, everything will change, so the design of the children's room should not be in place in one step, the need for appropriate blank space for the child's future.
If you plan to fully explore the space, there are actually many methods, you may wish to follow the designer to share from these two aspects.
Optimize the layout
Most of the small space room furniture is placed against the wall, so we can extend the wall of the furniture to completely increase the possibility of children's space.
1. Change the position of the door
The door is located in the corner of the room, move the door 600mm to the right to the middle of the room, at this time the left wall will naturally form a recess. In this way, the children's room is 1.5 times larger than the original space.
2. Storage cabinet
After the modification of the upper door, we turned the single wardrobe into a comprehensive storage cabinet for the whole house, in order to be able to realize the storage of children's clothes, books, toys, etc.
The size of the storage cabinet: length: 1600mm net depth: 500mm, height: 2850mm capacity of 2.28㎡
Storage cabinet layout one: clothes
In most cases, the wardrobes sold on the market, the hanging rails are fixed, which is no problem for adults, but for children lack of variability, in order to better adapt to the child's growth characteristics, I specially made two wavy arbitrary bracings, one left and one right installed on the side panel of the wardrobe, hanging clothes crossbar on the arbitrary brace. The interval between the two gears is 5 cm, which can be adjusted according to the season and the length of the dress, and the operation is very simple. Children can adjust the height of the clothes bar themselves.
Storage cabinet layout two: books
Parents generally give children a complete set of books to buy, so in the storage cabinet to make a bookshelf, the size of the general bookcase in the depth of 50 cm, width 80 cm, height in 2850mm, the net depth of the bookshelf is recommended at 35 cm, the depth of the laminate should not be too large. The remaining 15 cm position can not be wasted, we place the VIP books, so that when the bookcase is opened, the child can see it for the first time, which is also a reminder to stimulate the child's interest in active reading.
The side panels should be flexibly arranged between the holes, and the side plates should be filled with 32mm system holes, which can adjust the height of book items, which can reduce the waste of space and improve efficiency.
Storage cabinet layout three: toys
On the bottom floor of the large cabinet, according to the size of the cabinet, 6 independent activities of the paulownia toy box are also customized, and various toys are classified and stored.
The toy box uses 10mm thick natural paulownia wood, the advantage of this wood is that the wood is very light, and 4 cardan wheels are installed under the box, which is convenient for children to drag and is also interesting. The front of the box is recommended to be painted with blackboard paint, which allows children to draw different toys in each box on top of the blackboard paint to stimulate children's interest in storage.
Designer summary: For the children's room, environmental protection issues are of course placed in the first place, the plates of the large cabinet are all electrostatic powder spraying finishing process, and the plate is made of imported Southeast Asian rubber wood solid wood granular plate, the board itself contains environmental protection glue, and reached the national ten ring environmental protection certification, formaldehyde content can reach 0.05mg/l, to the child must be environmentally friendly and safe.
Designers popularize several common wardrobe panels:
1. Solid wood planks
Do furniture (wardrobe) choose solid wood board is the best environmentally friendly board, this board is generally made of complete wood, the interior does not contain chemical additives, is a pure natural board, the price is relatively high. For the sake of children's environmental protection problems, you can recommend a few squares of luxury.
2. Finger plate
Finger joint plate can be said to be an integrated board, in the production of both sides do not need to paste splint, so that the amount of glue used in the production process will be greatly reduced, in our production of furniture is also an economic and environmentally friendly plate.
3. Join the wooden planks
The joinery board is made of two pieces of veneer internal rubber splicing board, mainly the small wooden blocks are squeezed together with adhesive, the upper and lower veneer panels are pasted, and the glue and additives used in the production are relatively small, and it is also an environmentally friendly board.
4. Plywood
Plywood in the production of wood is cut into single pieces or thin slices, and then through the adhesive bonded into three or multi-layer plate material, the more plywood layers the amount of glue used will be greater, compared to the degree of environmental protection is worse. Considering the environmental protection and safety of the baby, it is recommended not to use this board.
5. Particleboard
Particleboard production is mainly the use of wood chips and some plant fibers mixed with high temperature pressing with adhesive, particle board in the production process will use a large amount of adhesive, because it will also produce a lot of formaldehyde, so the use of this board to make furniture more or less to release free formaldehyde.
6. MDF
MDF is also called fiberboard, mainly wood fibers and some other plant fibers as raw materials, after breaking up in the mixed with adhesive in the high temperature pressing, this plate in the production process will also use too much glue, so in the degree of environmental protection is also difficult to control.
7. Solid wood pellet board
It is made of wood and other wood fiber materials made of crushed materials, after high temperature hot pressing of the plate, which contains very little glue, has a strong grip of nails, good load-bearing force, with the advantages of insulation, sound absorption effect, etc., is also worth making a wardrobe for children one of the plates.
1. Build a bracket
Considering that the width of the room is limited, only 2200mm, simply take advantage of this, using the steel square as a bracket to build a floor slab across both sides of the room.
Steel bracket size: 50mm*50mm square pass, pipe wall thickness of 5mm.
The frame adopts cross-section square steel pipe: 50mm*50mm, and the thickness of the pipe wall is 3mm.
The row frame adopts cross-section square steel pipe: 25mm *25mm, and the thickness of the pipe wall is 3mm.
Upper and lower finishes: multi-layer wooden plywood 18mm.
Four sides of the steel frame: feet, firmly with expansion bolts, mounted on concrete walls.
2. Build doors and windows walls
With wooden keel and splints, the doors and windows of the second floor were made
Wooden keel size: 50mm*50mm.
Splints on both sides: 9mm
3. Install ladders and safety guardrails
Ladders and guardrails are installed for children to get up and down beds in order to facilitate and safely get up and down.
Designer Summary: Looks like a big project? It's actually much cheaper than you think! The construction cost only cost a total of 5,000 yuan, which is simply more affordable than buying a bed, which calculates that the half-floor area is 2 square meters, if compared with the house prices in first-tier cities, it is directly saved tens of thousands of yuan.
Whether a space makes people feel open or depressed is basically determined by the visual sensation of the moment you stand in the doorway and enter it.
Not suppressed little secrets: sight, volume, color Next the designer will explain them one by one:
Don't suppress little secret one: sight
Opening this children's door is the first thing that comes into view is the window in front of the right side of the person, above we have also told you that after the children's door is moved 60 centimeters to the right, the large cabinet on the left side of the door is located opposite the light source, and behind the door, the first glance will not be noticed.
The little secret of not suppressing two: volume
In such a small room, making such a tall cabinet, will it be scary to be large?
Its size is large or small, the key is to look at the side
As long as you see the side, human vision can produce a three-dimensional sense, the brain can judge whether it is thick or thin, the thicker the side, the darker the color, the greater the sense of volume. When you open the door, you will definitely see the thick side of the cabinet, which naturally feels very blocked and depressed.
If the cabinet is embedded in the C-shaped space and the sides cannot be seen, the brain will consciously feel depressed because the volume disappears.
Little secret of not suppressing three: color
The color has a sense of weight:
Dark objects give people several times the psychological weight of white objects.
The color has a sense of distance
The walls are painted with bright warm colors, such as orange and red, which will make people feel close and have a sense of progress.
Wall brushes with low-purity cool colors, such as gray-blue and sub-green, will make people feel far away and have a sense of retreat.
The walls and large cabinets of the upper and lower beds are painted white, and the other walls are painted light gray blue, so that the moment the children's door is opened, the whole house will not feel depressed.
Designer suggestion: the decoration design of the children's room, we grasp the word "plain", the plain space only needs a little colorful accessories, immediately become cheerful, full of childlike fun.
For example, the surface of the large wardrobe can be pasted with removable pictures, animals or other removable samples, and once the child's interest has changed, it can be directly removed.
The above is my personal from these aspects to describe how to design the children's room, we must first respect the child's ideas and suggestions before decoration, if there is no own ideas, it is recommended to find a designer who specializes in the design of the children's room to communicate, the best to give the child, is the biggest wish of every parent. You are building a new home for your baby, read this article before you start construction, it is worth collecting.