Reversing is a skill, and the old driver takes you to an easy stop.
Let's first analyze the design and structure of the vehicle, it is the front wheel control direction, the rear wheel is fixed, so it is decided that the rear rear dump storage is better than the front of the car storage (some oblique parking spaces are also suitable for the front of the car storage).
In general, parking spaces can be divided into three types: vertical, side and oblique.
Recommended collection: the most complete reversing and warehousing skills! Easy parking without stress!
Three types of detailed analysis
Vertical parking spaces
1. Priority is given to the rear of the car into the warehouse
Take a look at the two parking situations in the figure below.
Comparing the following situations one and two, the car is not parked, the body is not parallel to the rear, and the only difference is the direction of the front of the car.
If you want to adjust the car, which situation is easier?
The answer is scenario two. Situation one is very difficult to adjust. Adjust the situation one, you need to first play the left, eat a little space forward, and then quickly hit the right to reverse the car to straighten the car, so that there will be a problem that the car is too close to the left side of the car, you need to slowly straighten it, and then enter and straighten the body forward and left when there is enough space in front, which is a very process of testing car skills.
The second situation is much simpler, just need to play the full left, look forward a short section, and when the body is centered, it will go straight and straight after a short section of reversing.
2. When the space on the right side is sufficient, the reverse car only needs to stare at the side line
3. Pay attention to the difference in the inner wheel
Observe the left mirror, as long as the body does not touch the left column or the car next to it, you can boldly reverse the car, cooperate with the left side, and straighten the body. After straightening, compare the left and right distances and perform the adjustment method of the above case two.
Side-sided parking
The following figure is excerpted from the picture of the auto home, and with this picture to talk about some important points:
1. Drive the car to the front car holder
2. The distance between the body and the side car is 80-100cm, which is slightly different according to the difference between different cars and wheelbase.
3, play the steering wheel to reverse, the key point is to be fast and slow (the steering wheel should be adjusted fast, the speed of the car should be slow)
4. The center line of the body has passed the front car rear or the right rear side of the body has been close to the roadbed, so it is necessary to slowly return the steering wheel in the opposite direction.
5, pay attention to the right corner of the car do not touch the front car, the right corner of the car can start to straighten the body.
Diagonal parking
This kind of parking space is best parked, does not require high technical content, generally set on the side of the road, the front of the car to enter more convenient.
1, if there is more space on the left side, you can stay away from the parking area a little more, so that it is easier to straighten the body.
2. Pay attention to the distance between the right car corner and the car next to it.
3. Pay attention to the inner wheel difference mentioned above.
4. Pay attention to the height of the front subgrade, do not bump into or hang the chassis.