Short inches, glasses on the bridge of the nose, the "Chuan" character pattern that appears all the time in the eyebrows, a shirt with no wrinkles on the body... The Zhu Jianxin in front of him is completely in line with the author's presupposition of the image of the "xueba" in engineering.
"'Scholarly'?" Zhu Jianxin hurriedly waved his hand, and Wen crepe said, "It is too prestigious." ”
The author immediately pushed a thick stack of materials in his hand in front of him - it was all a "homework" done before interviewing the technical backbone of the Anyang Cigarette Factory of Henan Tobacco Industry Co., Ltd. opposite.
"Don't be modest. Look, I have all the 'evidence'. I started with academic journals, "I've found so many of your recent papers!" "Research on the Influence of Blade Deformation on the Stability of Wire Cutting Width during Wire Cutting", "Analysis of Solutions for Filter Plugging of Feeding Pump"..."
Before I could use the momentum of the "Eight Hundred Pacesetters Running north slope" tongue twister to report the names of these papers published in high-standard journals such as "China Equipment Engineering" and "Engineering Technology", Zhu Jianxin waved his hand again and said:
"Put it this way, I'm a 'learner,' not a 'learner.'"
In 1990, at the age of 20, Zhu Jianxin stepped into the door of the silk-making workshop of Anyang Cigarette Factory and started mechanical equipment maintenance work. Until now 26 years, I have never left this place, I have never left this post.
"In the past 26 years, my colleagues and I have regarded this workshop as our home, and our feelings are very deep. You said I was a 'school bully', and when I came here, I was just a student who had just graduated from mechanical manufacturing. ”
The silk making workshop has more than 20 processes, hundreds of process indicators, dense equipment, complex layout, and difficult maintenance. Unpredictable sudden failures in equipment have been a problem that has plagued the silk making workshop for many years. Whenever there is a fault and downtime, it can only "treat the headache and the foot pain", which is very passive. Maintenance personnel were jokingly called "firefighters" for this reason. In order to completely reverse this passivity, ensure production and increase efficiency, solutions must be devised. However, the daily repair and maintenance tasks have been very full, and Zhu Jianxin can only squeeze out the rest time between work to learn and think. He came up with the idea of parting out the preventive maintenance. It is to divide the equipment into people, the responsibility for inspection to people, and each maintenance worker is responsible for the equipment contracting responsibility area to which he belongs, and bears the corresponding assessment rewards and punishments. Replace "emergency" with "disease prevention" so that equipment maintenance can be ahead of the problem. Since the implementation of the sectional contracting method prevention and maintenance system, enterprises have reduced economic losses by nearly 2 million yuan. Through this incident, Zhu Jianxin strengthened his determination to learn for life and make continuous progress. From that time until now, in order to cope with various unexpected challenges in work and production, he always has a bunch of information books around him, which are updated from time to time, covering electrical, hydraulic, mechanical and other fields.
"The old saying goes, 'Sailing against the current, if you don't advance, you will retreat', and you dare not have a day without learning." Therefore, even if it is a 'learning bully', it is all learned. ”
"Did you also benefit from this habit of maintaining your learning status by obtaining the qualification of senior technician in 2009 and becoming a senior evaluator of China National Tobacco Corporation?" The author asked.
Mentioning this stubble, Zhu Jianxin smiled and replied: "Even then, it was hard work at that time." To paraphrase it's now popular – I'm using the 'power of the flood'. ”
The learning opportunity was not easy to come by, and Zhu Jianxin had to pass the selection layer by layer before he could participate in the training class for senior technicians in the repair of smoke machine equipment held by the Vocational Skills Appraisal Center of the State Tobacco Monopoly Administration. Entering the training class, he was like a senior in high school, getting up at 5 o'clock every morning to prepare, and repeatedly reviewing after class. In the past, Zhu Jianxin had seen people who had taken the TOEFL copy words on small pieces of paper and paste them all over the walls of the room, reading at any time to strengthen their memory, and he felt that the method was very good, and he also copied the knowledge points learned in the training class into cards and posted them. The 70-day training period used up more than 30 refills, completed more than 10 courses, and finally passed the exam beautifully.
In this way, Zhu Jianxin, who is diligent in learning and good thinking, assiduously studied professional technology in production and management work, and repeatedly broke through difficult and miscellaneous evidence. He presided over the completion of the "research on the quality of leaf-cutting silk technology", for improving the tobacco filling value and yarn finishing rate, improve the appearance quality and sensory quality of cigarettes have obvious effects, only the average silk yield of a year-round economic benefits of millions of yuan; presided over the completion of the "folding dust cover device for crank rock vibratory conveyor" won the first prize of the 2014 Henan Province Science and Technology Popularization Achievements. Zhu Jianxin has also made outstanding achievements in technological innovation, and has obtained more than 30 patents, including 7 invention patents and 24 utility models. Over the years, he has been rated as "Anyang City Hundred First-line Technical Heroes", "Henan Province Staff Technical Experts", the first "Anyang Excellent High-skilled Talents", 2013~2014 National "Stressing Ideals, Comparing Contributions" Innovation Pacesetter, and was awarded the "Anyang May Day Labor Medal".
Zhu Jianxin once used "skilled to produce a hundred tricks" to evaluate his contribution to technological progress and technological innovation. I think it is appropriate to quote this poem as a diligent and studious engineer who has been on the front line of production for many years. That is:
"Immersing oneself in hard work is the first, and skilled produces a hundred tricks." Diligence and clumsiness are good lessons, and one point of hard work is a point of talent. ”