What to do if you use a wireless microphone to hit a dead corner [Sound Extension Electronic Sound Jazz]
What should I do if I use a wireless microphone to hit a dead corner?
Dead end, is a popular saying, refers to the indoor place in a certain place can not receive wireless microphone signal. What should I do if I hit a dead corner with a wireless microphone? The following jazz dragon audio experience summary for your reference:
1, the simple way is to change the direction of the antenna, angle, etc., to see if you can improve the reception conditions.
2, if the use of the environment is too poor, you can choose a multi-frequency adjustable wireless microphone, it is the first automatic scan of the surrounding interference frequency, it is eliminated, the rest is the available non-interference frequency, and can use more than 200 sets at the same time.
3, you can change a set of frequencies to try, because some of the interference sources may just conflict with the frequency of this microphone, changing a set of frequencies can often solve the problem. If there is a column in the field and other receiving environment is not very good, try to choose a microphone, two antennas that kind of equipment, because the coverage of the four antennas can make the signal spread more comprehensively, such as people walking while speaking, then the receiving opportunity according to the microphone location, actively select the microphone with the strongest signal.
4, if the reception conditions are too harsh, such as the sound control room is not in the venue, or there are columns, wall barriers, etc., you can consider extending the antenna, the emergency method is as follows: take a video cable, about 10 ~ 15 meters, the original receiver antenna is removed and connected with the video cable, and then install the antenna in the place where you have been tested and can receive the signal.
Sonto Electronics is a professional set of audio equipment research and development, manufacturing, sales, technical services in one of the enterprises, SoundTronics is a professional production of audio processor manufacturers. "Sound Jazz EAJAX" is one of the brands of Guangzhou Shengtuo Electronics Co., Ltd. In 2014, the company acquired the sound jazz audio electronics factory founded in 2005, the main production of dante speakers / engineering speakers / conference speaker systems and other speaker products, strong combination, coupled with more than 10 years of professional audio technology research and development and manufacturing experience in the field of electroacoustics, and "domestic products when self-reliant" product quality strategy, the formation of "sound jazz EAJAX" brand products from technology research and development, design, manufacturing to the user use of the whole process of high quality, high requirements of the positioning and standards.
