How to handle the receiver ROHS test report? What are the steps?

What are the steps for the receiver to do ROHS test report processing? You can contact UNIC Testing for more information. The receiver is able to extract the information from the source output to the maximum extent possible from the disturbed signal and reproduce the output of the source as much as possible. Receiver products that want to be sold on the European market require ROHS testing and ROHS testing before they can be sold on the European market. Recently, I received a customer consultation on the Internet asking how the receiver can handle ROHS testing.

INTRODUCTION TO THE EU ROHS CERTIFICATION:

　　RoHS is a mandatory standard set by EU legislation, and its full name is the Restriction of Hazardous Substances in Electrical and Electronic Equipment. The standard has been officially implemented on July 1, 2006, mainly used to standardize the material and process standards for electronic and electrical products, making it more conducive to human health and environmental protection. The purpose of the standard is to eliminate lead, mercury, cadmium, hexavalent chromium, PBBs and PBDEs from electrical and electronic products (note: PBDE correct Chinese name refers to PBDEs, PBDEs are the wrong way to say) a total of 6 substances, and to specify that the lead content should not exceed 0.1%.

Receiver ROHS test report processing requirements:

ROHS Directive No.: 2011/65/EU

Generally, the European RoHS 2011/65/EU requires 6 items to be tested, and the directive comes into force as the ROHS Directive.

There are 6 non-metallic RoHS test items including lead (Pb), cadmium (Cd), mercury (Hg), hexavalent chromium (Cr6+), polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs).

There are four ROHS test items in metal materials: lead (Pb), cadmium (Cd), mercury (Hg), hexavalent chromium (Cr6+).

Receiver ROHS test report processing process:

1. Send samples: Contact unone engineers for consultation and mail samples

2. Free initial inspection: conduct preliminary inspection of samples and determine specific testing items according to customer needs

3. Quotation: Quotation according to the specific items of the sample and the testing method

4. The two parties determine - sign a confidentiality agreement and start the experiment

5. Complete the experiment: the testing cycle will change according to the sample and its detection items/methods, and engineers can be consulted

6. Issued test report: there is perfect after-sales service, which can be consulted at any time

Receiver ROHS test report processing cycle:

　　RoHS test cycle is inseparable from the product itself, product specific test items are different, then the time spent is different, Unite testing can provide customers with rapid service, the general test cycle is 5 working days.