Q: Why do bathrooms need three types of separation?
For the complete separation of wet and dry.
Q: How do you achieve three-way separation in the bathroom?
In addition to installing a shower room, separating the shower area from the toilet, it is also common practice to move the washstand out, directly removed to pack it separately, whether you bathe in it or use the toilet, it will not affect the washstand area, there is no better place than this dry and wet separation.
A separate outside wash stand, with toilet, shower area, low wall + long rainbow glass partition, protection of privacy, also transparent. Build a low wall with a height of about 1 meter and a width of 6 cm, which separates the washstand from the corridor to form an area division and facilitate the customization of the washstand.
As for the semi-glass partition above the low wall, the main thing is that it does not want to affect the lighting of the washstand area, and retaining a section of daylighting window does not affect the brightness here, killing two birds with one stone.
It is also possible not to install glass partitions, and to use the top of the low wall as a storage platform for putting green plants or bottles and cans such as facial cleanser. PS: the height can be controlled at about 1 meter, too high affects the light here, and it is not very convenient to take items.
Or just add a group of cabinets next to the washstand, washing machines, dryers stacked into it, instantaneous multiple laundry room functions, while with the shielding of the cabinet, but also to solve the existence of loneliness, this design deserves a big thumbs up! PS: the size of the cabinet should be accurate, don't wait for the electrical appliances to be transported home, only to find that they can't be put in, it will be too embarrassing.
In addition to washing wardrobes and low walls, there is also a way to cover the washing table, that is, to install glass partitions, preferably Changhong glass, frosted glass and the like, which are not transparent, and the partition effect is better.
Or glass bricks, instead of brick walls to use, but also a trick, strong and durable, the value is also high, add steel reinforcement piece by piece to the upper barrier on the line, the completion of the outward transfer of the washstand will become a landscape at home, how to see how to like, what do you think? I also recognize the high cost point. (Some of the pictures come from the Internet)